You will badly need this if your computer has no CD-ROM drive, especially for ASUS EEE-PC and Red fox Wizbook 800. What you need: - USB thumb drive with at least 1 GB of capacity. High speed is not necessary but preferred. - usb_prep8 (download it here) and bootsect (download it here) - a personal computer or laptop with Windows XP or Vista installed and with CD-ROM (DaemonTools and an iso file will do just fine at this point) - A genuine copy of Windows XP or Vista. *** Procedure 1 – copying XP to USB and configuring USB for Windows installation
1. extract usb_prep8 and bootsect.
2. In usb_prep8 folder. Double click usb_prep8.cmd. A command prompt will open.
3. Press any key to continue. A PeToUSB window will open –>
4. Don’t change anything in the PeToUSB window, just click “Start”. Formatting of your USB will then start. It will only take a few seconds.
5. DO NOT close the two windows (PetoUSB and usb_prep8). Now open a new command prompt by typing “cmd” in the Start->Run box. In this NEW command prompt, go to the directory where bootsect.exe is saved. Now type “bootsect.exe /nt52 R:“. Change “R” with the letter drive directory of your USB drive. NOTE: When running the bootsect.exe command you cannot have any windows open displaying the content of your USB stick. If all went well you should see “Bootcode was successfully updated on all targeted volumes.” Now close this command prompt (Still, Do not close usb_prep8).
6. Now close PeToUSB window. You should see the usb_prep8 command
7. Now you need to enter the correct information for numbers 1-3. Press 1 and then Enter. A folder browse window will open for you to browse to the location of you XP setup files (aka your cdrom drive with xp cd in it)
Press 2 and enter a letter NOT currently assigned to a drive on your PC, say T
Press 3 and enter the drive letter of your USB stick
Press 4 to start the process.
8. The script will ask you if its ok to format drive T: . This is just a temp drive the program creates to cache the windows installation files. Press Y then enter.
9. Once it’s done formatting, press enter to continue again, you will now see the program copying Windows XP files from your CD to the temp drive it created. This will take around 3-5 minutes. Once this is done press enter to continue again.
10. Next you will see a box pop up asking you to copy the files from temp drive to USB drive. Of course, click “Yes”. This will take around 15 minutes, depending on the speed of your USB. In my case, it took around 30 Minutes.
11. Once the program has completed copy files a popup window asking if you would like to USB drive to be preferred boot drive U: select “YES” on this window
12. You’re done with this part. Now select “YES” to unmount the virtual drive. *** Procedure 2 – Installing XP on your PC without CD-ROM, using USB thumb drive
1. Insert your USB then start your PC, then go to BIOS set-up. Set USB as your primary boot device. For EEE PC, if it did not boot on the USB after doing this, there is an option in the BIOS where you can change the primary and secondary memory, set USB as the primary. When doing this, I also changed the OS installation from “finished” to “start” just to make sure that the installation will work.
2. On the startup menu you have two options, select option number for text mode setup.
3. From this point on, it is just like any other windows XP installation. When prompt, delete all the partition, including the one with labeled “BIOS” for EEE-PC. Recreate the primary partition on your EEE pc and format it using NTFS.
4. Once the text mode portion of setup is complete, the computer will reboot. This time, boot into the GUI mode.
5. Once the GUI portion of setup is complete you will again have to boot into GUI mode to complete the XP installation until you end up at your XP desktop. It is very important that you DO NOT REMOVE THE USB STICK before this point. Once you can see your start menu it is safe to remove the usb stick and reboot your pc to make sure everything worked.
That is all, I didn’t encounter a problem during my installation of XP for my Asus EEE-PC 4G. Just strictly follow the procedures discussed above. All of these were derived from http://www.eeeguides.com/2007/11/installing-windows-xp-from-usb-thumb.html
WinRar Tutorial Compression profiles, passwords and more
FIRST - Set Yer options correctly
Open WInRar
OPTIONS | SETTINGS | COMPRESSSION | CREATE DEFAULT
GENERAL | (ok now that we're there, here's what U do next)
But 1st -> realize that everything U set on the default profile will occur everytime U rar files. So if U only need a password occasionally, or other special settings, then create another profile for those purposes. U can change which profile U need to use when WinRar is open. The Default profile is used otherwise, such as when using WinRar from the context menus in explorer.
General tab:
Archive format RAR
Compression method BEST
size (enter in BYTES the size you want as the max single Rar file). I use 51,200,000 (50,000 KB x 1024). But chose yer max size as U wish.
Update method ADD AND REPLACE FILES
Archiving options: check > PUT RECOVERY RECORD
Archiving options: check > TEST ARCHIVED FILES.
Archiving options: check > DELETE FILES AFTER ARCHIVING ( unless U want yer HDD to fill up with the rars & the original files for some reason)
Archiving options: do NOT check > Put authenticy verification, as this can be a source of Error Messages being generated upon extraction.
Archiving options: check > Create SFX ONLY if U don't expect the person getting the filez to have WinRar. Otherwise leave it UNCHECKED.
Archiving options: do NOT check > Create Solid Archive. This can cause problems in certain cases.
Archiving options: do NOT check > Lock Arhive. This has NOTHING to do with a password.
Advanced tab:
Recovery Record -> U can leave it at 1%. Only set it higher if U expect the rar files to have a high risk of corruption. (very bad internet connections, or use on floppy disks, etc)
All else can be left alone. Don't bother with the Compression button.
Files Tab
File Paths -> STORE RELATIVE PATHS. (unless U have a specific folder U want the files to be extracted to. Such as c:\program files\No Name Appz\link catcher).
The rest leave alone
Backup Tab
No need to change anything.
Time Tab
Files to Process -> OF ANY TIME
Comment Tab
Whatever comment U enter there will be shown on the right hand pane when WinRar opens yer Rar files. Think of something fun, catchy,interesting. I always mention that the files have recovery record set, so if they are corrupted in transfer, the person knows to use REPAIR function.
Click OK, U have now created yer default profile.
==============================================
HOW TO CREATE a PASSWORDED PROFILE, which will NOT be the default:
open WInRar
Click the ADD Icon
ADVANCED | Push the SET PASSWORD Button
Check the SHOW PASSWORD box, so U can see what U typed and also copy/paste it to wherever U need it, such as on yer post. Now only one box will be open to enter the password. COPY/PASTE it to a txt file. I call mine WinRAR_Password.txt. Do this IMMEDIATELY afer entering it, before closing that window, or U may be very sorry later.
Enter the password. It is CASE SENSITIVE. If the password is 8 or more alpha-numeric characters, no one will be able to hack it. Unless they own a super-computer. Avoid using words that are found in dictionaries.
Check the encrypt file names box. That way, even if some nasty person obtains yer Rar file, they won't know what is in it, especially if the name U give the rar file is "Grandma_pix.rar" or whatever.
Back to GENERAL tab | PROFILES button | Save Current Settings to a New Profile
Enter the name of this profile. For example if the passwd is ht*p://www.superforum.com, U might name the profile Superforum. Only U will see this profile name. It does not go into the rar files made from it.
Do NOTHING more, do NOT set this as default profile.
Click OK | Click OK again.
Now U have a Passworded Profile.
================================================
HOW TO USE the PASSWORD PROFILE
Note -> Everything U set on the default profile will occur everytime U rar files. So when U need the password profile, follow these instructions. The Default profile is used otherwise, such as when using WinRar from the contest menus in explorer.
Open WinRar
Browse to the filez/folderz U want to Rar with Password.
Highlight all filez/folderz to be included.
Press the ADD button.
GENERAL tab | PROFILES button
Scoll down to the profile whcih has the password set. In my example Superforum
Click OK
The filez are Rar'd. U can check if U did all correctly by opening the rar filez, and seeing if a password is required.
Until U change back to DEFAULT profile in this same method, or close WinRar, all Rar'z U create after this will have a password.
================================================
HOW TO REPAIR A CORRUPTED RAR FILE:
With Win Explorer create a sub folder REPAIRED
Open WinRar, browse to the folder with the damaged Rar file(z). U can find which one is bad by selecting the 1st RAR file and using TEST button.
Select the damaged file, press REPAIR button.
In dialogue box, enter the path to the REPAIR subfolder, or browse to it.
As long as there is a RECOVERY record in that Rar, it will be repaired.
Copy all the NON-DAMAGED rars to your repair folder and rename the REPAIRED file back to it's original name.
Proceed with extraction in the REPAIR folder as normal.
===============================================
MISC TIPS:
If U select a folder to Rar, later when U extract it inside that folder, U end up with nested folders of same name. (We've all seen this often when extracting rars.
So Instead, go inside the folder, select all the filez & sub-folderz. Now U have a rar inside just one folder.
Note to w***z Groups, how about using WinRar Recovery option finally, and avoiding problems with corrupt DL's ?
Open WInRar
OPTIONS | SETTINGS | COMPRESSSION | CREATE DEFAULT
GENERAL | (ok now that we're there, here's what U do next)
But 1st -> realize that everything U set on the default profile will occur everytime U rar files. So if U only need a password occasionally, or other special settings, then create another profile for those purposes. U can change which profile U need to use when WinRar is open. The Default profile is used otherwise, such as when using WinRar from the context menus in explorer.
General tab:
Archive format RAR
Compression method BEST
size (enter in BYTES the size you want as the max single Rar file). I use 51,200,000 (50,000 KB x 1024). But chose yer max size as U wish.
Update method ADD AND REPLACE FILES
Archiving options: check > PUT RECOVERY RECORD
Archiving options: check > TEST ARCHIVED FILES.
Archiving options: check > DELETE FILES AFTER ARCHIVING ( unless U want yer HDD to fill up with the rars & the original files for some reason)
Archiving options: do NOT check > Put authenticy verification, as this can be a source of Error Messages being generated upon extraction.
Archiving options: check > Create SFX ONLY if U don't expect the person getting the filez to have WinRar. Otherwise leave it UNCHECKED.
Archiving options: do NOT check > Create Solid Archive. This can cause problems in certain cases.
Archiving options: do NOT check > Lock Arhive. This has NOTHING to do with a password.
Advanced tab:
Recovery Record -> U can leave it at 1%. Only set it higher if U expect the rar files to have a high risk of corruption. (very bad internet connections, or use on floppy disks, etc)
All else can be left alone. Don't bother with the Compression button.
Files Tab
File Paths -> STORE RELATIVE PATHS. (unless U have a specific folder U want the files to be extracted to. Such as c:\program files\No Name Appz\link catcher).
The rest leave alone
Backup Tab
No need to change anything.
Time Tab
Files to Process -> OF ANY TIME
Comment Tab
Whatever comment U enter there will be shown on the right hand pane when WinRar opens yer Rar files. Think of something fun, catchy,interesting. I always mention that the files have recovery record set, so if they are corrupted in transfer, the person knows to use REPAIR function.
Click OK, U have now created yer default profile.
==============================================
HOW TO CREATE a PASSWORDED PROFILE, which will NOT be the default:
open WInRar
Click the ADD Icon
ADVANCED | Push the SET PASSWORD Button
Check the SHOW PASSWORD box, so U can see what U typed and also copy/paste it to wherever U need it, such as on yer post. Now only one box will be open to enter the password. COPY/PASTE it to a txt file. I call mine WinRAR_Password.txt. Do this IMMEDIATELY afer entering it, before closing that window, or U may be very sorry later.
Enter the password. It is CASE SENSITIVE. If the password is 8 or more alpha-numeric characters, no one will be able to hack it. Unless they own a super-computer. Avoid using words that are found in dictionaries.
Check the encrypt file names box. That way, even if some nasty person obtains yer Rar file, they won't know what is in it, especially if the name U give the rar file is "Grandma_pix.rar" or whatever.
Back to GENERAL tab | PROFILES button | Save Current Settings to a New Profile
Enter the name of this profile. For example if the passwd is ht*p://www.superforum.com, U might name the profile Superforum. Only U will see this profile name. It does not go into the rar files made from it.
Do NOTHING more, do NOT set this as default profile.
Click OK | Click OK again.
Now U have a Passworded Profile.
================================================
HOW TO USE the PASSWORD PROFILE
Note -> Everything U set on the default profile will occur everytime U rar files. So when U need the password profile, follow these instructions. The Default profile is used otherwise, such as when using WinRar from the contest menus in explorer.
Open WinRar
Browse to the filez/folderz U want to Rar with Password.
Highlight all filez/folderz to be included.
Press the ADD button.
GENERAL tab | PROFILES button
Scoll down to the profile whcih has the password set. In my example Superforum
Click OK
The filez are Rar'd. U can check if U did all correctly by opening the rar filez, and seeing if a password is required.
Until U change back to DEFAULT profile in this same method, or close WinRar, all Rar'z U create after this will have a password.
================================================
HOW TO REPAIR A CORRUPTED RAR FILE:
With Win Explorer create a sub folder REPAIRED
Open WinRar, browse to the folder with the damaged Rar file(z). U can find which one is bad by selecting the 1st RAR file and using TEST button.
Select the damaged file, press REPAIR button.
In dialogue box, enter the path to the REPAIR subfolder, or browse to it.
As long as there is a RECOVERY record in that Rar, it will be repaired.
Copy all the NON-DAMAGED rars to your repair folder and rename the REPAIRED file back to it's original name.
Proceed with extraction in the REPAIR folder as normal.
===============================================
MISC TIPS:
If U select a folder to Rar, later when U extract it inside that folder, U end up with nested folders of same name. (We've all seen this often when extracting rars.
So Instead, go inside the folder, select all the filez & sub-folderz. Now U have a rar inside just one folder.
Note to w***z Groups, how about using WinRar Recovery option finally, and avoiding problems with corrupt DL's ?
Windows Xp Tips 'n' Tricks
Please note that some of these tips require you to use a Registry Editor (regedit.exe), which could render your system unusable. Thus, none of these tips are supported in any way: Use them at your own risk. Also note that most of these tips will require you to be logged on with Administrative rights.
Unlocking WinXP's setupp.ini
============================
WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:
ExtraData=707A667567736F696F697911AE7E05
Pid=55034000
The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail cd that lets you clean install or upgrade, or an oem cd that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP cd that acted like a retail cd, yet accepted OEM keys.
Now, for the actual values. Remember the first and last values are interchangable, but usually you'd keep them as a pair:
Retail = 51882 335
Volume License = 51883 270
OEM = 82503 OEM
So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:
Pid=51882335
And if you wanted a retail CD that took OEM keys, you'd use:
Pid=51882OEM
How do I get the "Administrator" name on Welcome Screen?
========================================================
To get Admin account on the "Welcome Screen" as well as the other usernames, make sure that there are no accounts logged in.
Press "ctrl-alt-del" twice and you should be able to login as administrator!
finally worked for me after i found out that all accounts have to be logged out first
Fix Movie Inteferance in AVI files
==================================
If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference:
Open Windows Movie Maker.
Click View and then click Options.
Click in the box to remove the check mark beside Automatically create clips.
Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the rerendering, the interference will be removed.
Create a Password Reset Disk
============================
If you’re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:
Click Start, click Control Panel, and then click User Accounts.
Click your account name.
Under Related Tasks, click Prevent a forgotten password.
Follow the directions in the Forgotten Password Wizard to create a password reset disk.
Store the disk in a secure location, because anyone using it can access your local user account
Change Web Page Font Size on the Fly
====================================
If your mouse contains a wheel for scrolling, you can change font size on the fly when viewing a Web page. To do so:
Press and hold Ctrl. Scroll down (or towards yourself) to enlarge the font size. Scroll up (or away from yourself) to reduce the font size.
You might find it useful to reduce font size when printing a Web page, so that you can fit more content on the page.
WinXP Clear Page file on shutdown
=================================
WINXPCPS.REG (WinXP Clear Page file on shutdown)
This Registration (.REG) file clears the Page file when you power off the computer.
Restart Windows for these changes to take effect!
ALWAYS BACKUP YOUR SYSTEM BEFORE MAKING ANY CHANGES!
Browse to: HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ Session Manager \ Memory Management
and add the DWORD variable "ClearPageFileAtShutdown"=dword:00000001
You can also do this without reg hacking.
Go to Control panel Administartative tools, local security policy. then goto local policies ---> security options.
Then change the option for "Shutdown: Clear Virtual Memory Pagefile"
Group Policy for Windows XP
===========================
One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:
gpedit.msc
After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit. Dig around and enjoy!
Forgetting What Your Files Are?
===============================
This procedure works under NTFS.
As times goes along you have a lot files on your computer. You are going to forget what they are. Well here is way to identify them as you scroll through Windows Explorer in the future.
This procedure works under NTFS.
1.. Open up a folder on your system that you want to keep track of the different files you might one to identify in the future.
2.. Under View make certain that you set it to the Details.
3.. Highlight the file you want to keep more information on. Right click the file and you will get a pop up menu. Click on properties.
4.. Click on the Summary Tab (make sure it says simple not advanced on the button in the box), You should now get the following fields,
Title,Subject, Author, Category, Keywords, Comments
You will see advanced also if you have changed it to simple, Here will be other fields you can fill in.
5.. Next you can fill in what ever field you want.
6.. After you finished click the apply button then OK.
7.. Next right click the bar above your files, under the address barand you should get a drop down menu. Here you can click the fields you want to display.
8.. You should now see a list with the new fields and any comments you have done.
9.. Now if you want to sort these just right click a blank spot and then you sort the information to your liking.
Temporarily Assign Yourself Administrative Permissions
======================================================
Many programs require you to have Administrative permissions to be able to install them. Here is an easy way to temporarily assign yourself Administrative permissions while you remain logged in as a normal user.
Hold down the Shift key as you right-click on the program’s setup file.
Click Run as.
Type in a username and password that have Administrative permissions.
This will also work on applications in the Start menu.
Create a Shortcut to Lock Your Computer
=======================================
Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screensaver.
To create a shortcut on your desktop to lock your computer:
Right-click the desktop.
Point to New, and then click Shortcut.
The Create Shortcut Wizard opens. In the text box, type the following:
rundll32.exe user32.dll,LockWorkStation
Click Next.
Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like.
Click Finish.
You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll).
To change the icon:
Right click the shortcut and then select Properties.
Click the Shortcut tab, and then click the Change Icon button.
In the Look for icons in this file text box, type:
Shell32.dll.
Click OK.
Select one of the icons from the list and then click OK
You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.
Create a Shortcut to Start Remote Desktop
=========================================
Tip: You can add a shortcut to the desktop of your home computer to quickly start Remote Desktop and connect to your office computer.
To create a shortcut icon to start Remote Desktop
Click Start, point to More Programs, point to Accessories, point to Communications, and then click on Remote Desktop Connection.
Click Options.
Configure settings for the connection to your office computer.
Click Save As, and enter a name, such as Office Computer. Click Save.
Open the Remote Desktops folder.
Right-click on the file named Office Computer, and then click Create Shortcut.
Drag the shortcut onto the desktop of your home computer.
To start Remote Desktop and connect to your office computer, double-click on the shortcut
Instantly Activate a Screensaver
================================
Turn on a screensaver without having to wait by adding a shortcut to your desktop:
Click the Start button, and then click Search.
In the Search Companion window, click All file types.
In the file name box, type *.scr
In the Look in box, choose Local Hard Drives (C or the drive where you have system files stored on your computer.
Click Search.
You will see a list of screensavers in the results. Pick a screensaver you want. You can preview it by double-clicking it.
Right click on the file, choose Send To, and then click Desktop (create shortcut).
To activate the screensaver, double-click the icon on your desktop
Add a Map Drive Button to the Toolbar
=====================================
Do you want to quickly map a drive, but can’t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.
Option One (Long Term Fix)
Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.
Right-click the toolbar again, and then click Customize.
Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.
Click Close, click OK, and then click OK again.
You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.
Option Two (Quick Fix)
Click Start, and right-click My Computer.
Click Map Network Drive.
If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!
Software not installing?
========================
If you have a piece of software that refuses to install because it says that you are not running Windows 2000 (such as the Win2K drivers for a Mustek scanner!!) you can simply edit HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProductName to say Microsoft Windows 2000 instead of XP and it will install. You may also have to edit the version number or build number, depending on how hard the program tries to verify that you are installing on the correct OS. I had to do this for my Mustek 600 CP scanner (compatibility mode didn''t help!!!) and it worked great, so I now have my scanner working with XP (and a tech at Mustek can now eat his words).
BTW, don''t forget to restore any changes you make after you get your software installed
You do this at your own risk.
Use your Windows Key
====================
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don''t ignore it. It is the shortcut anchor for the following commands:
Windows: Display the Start menu
Windows + D: Minimize or restore all windows
Windows + E: Display Windows Explorer
Windows + F: Display Search for files
Windows + Ctrl + F: Display Search for computer
Windows + F1: Display Help and Support Center
Windows + R: Display Run dialog box
Windows + break: Display System Properties dialog box
Windows + shift + M: Undo minimize all windows
Windows + L: Lock the workstation
Windows + U: Open Utility Manager
Windows + Q: Quick switching of users (Powertoys only)
Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your pc
Change your cd key
==================
You don't need to re-install if you want to try the key out ... just do this:
1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter NOT ALLOWED ~ Zabref
5. Click "Update"
Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.
Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.
Remove the Shared Documents folders from My Computer
====================================================
One of the most annoying things about the new Windows XP user interface is that Microsoft saw fit to provide links to all of the Shared Documents folders on your system, right at the top of the My Computer window. I can't imagine why this would be the default, even in a shared PC environment at home, but what's even more annoying is that you cannot change this behavior through the sh*ll
: Those icons are stuck there and you have to live with it.
Until now, that is.
Simply fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You'll see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this, all of the Shared Documents folders (which are normally under the group called "Other Files Stored on This Computer" will be gone.
You do not need to reboot your system to see the change.
Before: A cluttered mess with icons no one will ever use (especially that orpaned one). After: Simplicity itself, and the way it should be by default.
This tip For older XP builds
===================
Edit or remove the "Comments" link in window title bars
During the Windows XP beta, Microsoft has added a "Comments?" hyperlink to the title bar of each window in the system so that beta testers can more easily send in a problem report about the user interface. But for most of us, this isn't an issue, and the Comments link is simply a visual distraction. And for many programs that alter the title bar, the Comments link renders the Minimize, Maximize, and Close window buttons unusable, so it's actually a problem.
Let's get rid of it. Or, if you're into this kind of thing, you can edit it too.
Open the Registry Editor and navigate to the following keys:
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonEnabled
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonText
The first key determines whether the link appears at all; change its value to 0 to turn it off. The second key lets you have a little fun with the hyperlink; you can change the text to anything you'd like, such as "Paul Thurrott" or whatever.
Editing either value requires a restart before the changes take effect.
Before: An unnecessary hyperlink. Have some fun with it! Or just remove it entirely. It's up to you.
Rip high-quality MP3s in Windows Media Player 8
================================================
The relationship between Windows Media Player 8 and the MP3 audio format is widely misunderstood. Basically, WMP8 will be able to playback MP3 files, but encoding (or "ripping" CD audio into MP3 format will require an MP3 plug-in. So during the Windows XP beta, Microsoft is supplying a sample MP3 plug-in for testing purposes, but it's limited to 56 Kbps rips, which is pretty useless. However, if you have an externally installed MP3 codec, you can use WMP8 to rip at higher bit rates. But you'll have to edit the Registry to make this work.
Fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MediaPlayer \ Settings \ MP3Encoding
Here, you'll see sub-keys for LowRate and LowRateSample, which of course equates to the single 56 Kbps sample rate you see in WMP8. To get better sampling rates, try adding the following keys (Using New then DWORD value):
"LowRate" = DWORD value of 0000dac0
"MediumRate" = DWORD value of 0000fa00
"MediumHighRate" = DWORD value of 0001f400
"HighRate" = DWORD value of 0002ee00
Now, when you launch WMP8 and go into Tools, then Options, then Copy Music, you will have four encoding choices for MP3: 56 Kbps, 64 Kbps, 128 Kbps, and 192 Kbps. Note that you will not get higher bit rate encoding unless you have installed an MP3 codec separately; the version in Windows Media Player 8 is limited to 56 Kbps only.
Find the appropriate location in the Registry... ...add a few DWORD values... ...And then you'll be ripping CDs in higher-quality MP3 format!
Speed up the Start Menu
=======================
The default speed of the Start Menu is pretty slow, but you can fix that by editing a Registry Key. Fire up the Registry Editor and navigate to the following key:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay
By default, the value is 400. Change this to a smaller value, such as 0, to speed it up.
Speed up the Start Menu (Part two)
==================================
If your confounded by the slow speed of the Start Menu, even after using the tip above, then you might try the following: Navigate to Display Properties then Appearance then Advanced and turn off the option titled Show menu shadow . You will get much better overall performance.
Speed up Internet Explorer 6 Favorites
======================================
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why:
Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.
Do an unattended installation
=============================
The Windows XP Setup routine is much nicer than that in Windows 2000 or Windows Me, but it's still an hour-long process that forces you to sit in front of your computer for an hour, answering dialog boxes and typing in product keys. But Windows XP picks up one of the more useful features from Windows 2000, the ability to do an unattended installation, so you can simply prepare a script that will answer all those dialogs for you and let you spend some quality time with your family.
I've written about Windows 2000 unattended installations and the process is pretty much identical on Windows XP, so please read that article carefully before proceeding. And you need to be aware that this feature is designed for a standalone Windows XP system: If you want to dual-boot Windows XP with another OS, you're going to have to go through the interactive Setup just like everyone else: An unattended install will wipe out your hard drive and install only Windows XP, usually.
To perform an unattended installation, you just need to work with the Setup Manager, which is located on the Windows XP CD-ROM in D:\SupportTools\DEPLOY.CAB by default: Extract the contents of this file and you'll find a number of useful tools and help files; the one we're interested in is named setupmgr.exe. This is a very simple wizard application that will walk you through the process of creating an answer file called winnt.sif that can be used to guide Windows XP Setup through the unattended installation.
One final tip: There's one thing that Setup Manager doesn't add: Your product key. However, you can add this to the unattend.txt file manually. Simply open the file in Notepad and add the following line under the [UserData] section:
ProductID=RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
(This is a 60 day cd key)
Then, just copy winnt.sif to a floppy, put your Windows XP CD-ROM in the CD drive, and reboot: When the CD auto-boots, it will look for the unattend.txt file in A: automatically, and use it to answer the Setup questions if it's there.
Finally, please remember that this will wipe out your system! Back up first, and spend some time with the help files in DEPLOY.CAB before proceeding.
For Older builds or not using setupreg.hiv file
===============================================
Remove the Desktop version text
During the Windows XP beta, you will see text in the lower right corner of the screen that says Windows XP Professional, Evaluation Copy. Build 2462 or similar. A lot of people would like to remove this text for some reason, and while it's possible to do so, the cure is more damaging than the problem, in my opinion. So the following step will remove this text, but you'll lose a lot of the nice graphical effects that come in Windows XP, such as the see-through icon text.
To remove the desktop version text, open Display Properties (right-click the desktop, then choose Properties) and navigate to the Desktop page. Click Customize Desktop and then choose the Web page in the resulting dialog. On this page, check the option titled Lock desktop items. Click OK to close the dialog, and then OK to close Display Properties. The text disappears. But now the rest of your system is really ugly. You can reverse the process by unchecking Lock desktop items.
There's also a shortcut for this process: Just right-click the desktop and choose Arrange by then Lock Web Icons on the Desktop.
--------------------------------------------------------------------------------
Enable ClearType on the Welcome Screen!
=======================================
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Stop Windows Messenger from Auto-Starting
=========================================
If you're not a big fan of Windows Messenger simply delete the following Registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS
Display Hibernate Option on the Shut Down dialog
================================================
For some reason, Hibernate may not be available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Add album art to any music folder
=================================
One of the coolest new features in Windows XP is its album thumbnail generator, which automatically places the appropriate album cover art on the folder to which you are copying music (generally in WMA format). But what about those people that have already copied their CDs to the hard drive using MP3 format? You can download album cover art from sites such as cdnow.com or amguide.com, and then use the new Windows XP folder customize feature to display the proper image for each folder. But this takes time--you have to manually edit the folder properties for every single folder--and you will lose customizations if you have to reinstall the OS. There's an excellent fix, however.
When you download the album cover art from the Web, just save the images as folder.jpg each time and place them in the appropriate folder. Then, Windows XP will automatically use that image as the thumbnail for that folder and, best of all, will use that image in Windows Media Player for Windows XP (MPXP) if you choose to display album cover art instead of a visualization. And the folder customization is automatic, so it survives an OS reinstallation as well. Your music folders never looked so good!
Album cover art makes music folder thumbnails look better than ever!
Change the location of the My Music or My Pictures folders
==========================================================
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the sh*ll
. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special sh*ll
folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Or use Tweak UI
Add/Remove optional features of Windows XP
==========================================
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:
[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Cool, eh? There are even more new options now under "Accessories and Utilities" too.
Remove Windows Messenger
========================
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
Unlocking WinXP's setupp.ini
============================
WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:
ExtraData=707A667567736F696F697911AE7E05
Pid=55034000
The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail cd that lets you clean install or upgrade, or an oem cd that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP cd that acted like a retail cd, yet accepted OEM keys.
Now, for the actual values. Remember the first and last values are interchangable, but usually you'd keep them as a pair:
Retail = 51882 335
Volume License = 51883 270
OEM = 82503 OEM
So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:
Pid=51882335
And if you wanted a retail CD that took OEM keys, you'd use:
Pid=51882OEM
How do I get the "Administrator" name on Welcome Screen?
========================================================
To get Admin account on the "Welcome Screen" as well as the other usernames, make sure that there are no accounts logged in.
Press "ctrl-alt-del" twice and you should be able to login as administrator!
finally worked for me after i found out that all accounts have to be logged out first
Fix Movie Inteferance in AVI files
==================================
If you have any AVI files that you saved in Windows 9x, which have interference when opened in Windows XP, there is an easy fix to get rid of the interference:
Open Windows Movie Maker.
Click View and then click Options.
Click in the box to remove the check mark beside Automatically create clips.
Now, import the movie file that has interference and drag it onto the timeline. Then save the movie, and during the rerendering, the interference will be removed.
Create a Password Reset Disk
============================
If you’re running Windows XP Professional as a local user in a workgroup environment, you can create a password reset disk to log onto your computer when you forget your password. To create the disk:
Click Start, click Control Panel, and then click User Accounts.
Click your account name.
Under Related Tasks, click Prevent a forgotten password.
Follow the directions in the Forgotten Password Wizard to create a password reset disk.
Store the disk in a secure location, because anyone using it can access your local user account
Change Web Page Font Size on the Fly
====================================
If your mouse contains a wheel for scrolling, you can change font size on the fly when viewing a Web page. To do so:
Press and hold Ctrl. Scroll down (or towards yourself) to enlarge the font size. Scroll up (or away from yourself) to reduce the font size.
You might find it useful to reduce font size when printing a Web page, so that you can fit more content on the page.
WinXP Clear Page file on shutdown
=================================
WINXPCPS.REG (WinXP Clear Page file on shutdown)
This Registration (.REG) file clears the Page file when you power off the computer.
Restart Windows for these changes to take effect!
ALWAYS BACKUP YOUR SYSTEM BEFORE MAKING ANY CHANGES!
Browse to: HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ Session Manager \ Memory Management
and add the DWORD variable "ClearPageFileAtShutdown"=dword:00000001
You can also do this without reg hacking.
Go to Control panel Administartative tools, local security policy. then goto local policies ---> security options.
Then change the option for "Shutdown: Clear Virtual Memory Pagefile"
Group Policy for Windows XP
===========================
One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:
gpedit.msc
After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit. Dig around and enjoy!
Forgetting What Your Files Are?
===============================
This procedure works under NTFS.
As times goes along you have a lot files on your computer. You are going to forget what they are. Well here is way to identify them as you scroll through Windows Explorer in the future.
This procedure works under NTFS.
1.. Open up a folder on your system that you want to keep track of the different files you might one to identify in the future.
2.. Under View make certain that you set it to the Details.
3.. Highlight the file you want to keep more information on. Right click the file and you will get a pop up menu. Click on properties.
4.. Click on the Summary Tab (make sure it says simple not advanced on the button in the box), You should now get the following fields,
Title,Subject, Author, Category, Keywords, Comments
You will see advanced also if you have changed it to simple, Here will be other fields you can fill in.
5.. Next you can fill in what ever field you want.
6.. After you finished click the apply button then OK.
7.. Next right click the bar above your files, under the address barand you should get a drop down menu. Here you can click the fields you want to display.
8.. You should now see a list with the new fields and any comments you have done.
9.. Now if you want to sort these just right click a blank spot and then you sort the information to your liking.
Temporarily Assign Yourself Administrative Permissions
======================================================
Many programs require you to have Administrative permissions to be able to install them. Here is an easy way to temporarily assign yourself Administrative permissions while you remain logged in as a normal user.
Hold down the Shift key as you right-click on the program’s setup file.
Click Run as.
Type in a username and password that have Administrative permissions.
This will also work on applications in the Start menu.
Create a Shortcut to Lock Your Computer
=======================================
Leaving your computer in a hurry but you don’t want to log off? You can double-click a shortcut on your desktop to quickly lock the keyboard and display without using CTRL+ALT+DEL or a screensaver.
To create a shortcut on your desktop to lock your computer:
Right-click the desktop.
Point to New, and then click Shortcut.
The Create Shortcut Wizard opens. In the text box, type the following:
rundll32.exe user32.dll,LockWorkStation
Click Next.
Enter a name for the shortcut. You can call it "Lock Workstation" or choose any name you like.
Click Finish.
You can also change the shortcut's icon (my personal favorite is the padlock icon in shell32.dll).
To change the icon:
Right click the shortcut and then select Properties.
Click the Shortcut tab, and then click the Change Icon button.
In the Look for icons in this file text box, type:
Shell32.dll.
Click OK.
Select one of the icons from the list and then click OK
You could also give it a shortcut keystroke such CTRL+ALT+L. This would save you only one keystroke from the normal command, but it could be more convenient.
Create a Shortcut to Start Remote Desktop
=========================================
Tip: You can add a shortcut to the desktop of your home computer to quickly start Remote Desktop and connect to your office computer.
To create a shortcut icon to start Remote Desktop
Click Start, point to More Programs, point to Accessories, point to Communications, and then click on Remote Desktop Connection.
Click Options.
Configure settings for the connection to your office computer.
Click Save As, and enter a name, such as Office Computer. Click Save.
Open the Remote Desktops folder.
Right-click on the file named Office Computer, and then click Create Shortcut.
Drag the shortcut onto the desktop of your home computer.
To start Remote Desktop and connect to your office computer, double-click on the shortcut
Instantly Activate a Screensaver
================================
Turn on a screensaver without having to wait by adding a shortcut to your desktop:
Click the Start button, and then click Search.
In the Search Companion window, click All file types.
In the file name box, type *.scr
In the Look in box, choose Local Hard Drives (C or the drive where you have system files stored on your computer.
Click Search.
You will see a list of screensavers in the results. Pick a screensaver you want. You can preview it by double-clicking it.
Right click on the file, choose Send To, and then click Desktop (create shortcut).
To activate the screensaver, double-click the icon on your desktop
Add a Map Drive Button to the Toolbar
=====================================
Do you want to quickly map a drive, but can’t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.
Option One (Long Term Fix)
Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.
Right-click the toolbar again, and then click Customize.
Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.
Click Close, click OK, and then click OK again.
You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.
Option Two (Quick Fix)
Click Start, and right-click My Computer.
Click Map Network Drive.
If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!
Software not installing?
========================
If you have a piece of software that refuses to install because it says that you are not running Windows 2000 (such as the Win2K drivers for a Mustek scanner!!) you can simply edit HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProductName to say Microsoft Windows 2000 instead of XP and it will install. You may also have to edit the version number or build number, depending on how hard the program tries to verify that you are installing on the correct OS. I had to do this for my Mustek 600 CP scanner (compatibility mode didn''t help!!!) and it worked great, so I now have my scanner working with XP (and a tech at Mustek can now eat his words).
BTW, don''t forget to restore any changes you make after you get your software installed
You do this at your own risk.
Use your Windows Key
====================
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don''t ignore it. It is the shortcut anchor for the following commands:
Windows: Display the Start menu
Windows + D: Minimize or restore all windows
Windows + E: Display Windows Explorer
Windows + F: Display Search for files
Windows + Ctrl + F: Display Search for computer
Windows + F1: Display Help and Support Center
Windows + R: Display Run dialog box
Windows + break: Display System Properties dialog box
Windows + shift + M: Undo minimize all windows
Windows + L: Lock the workstation
Windows + U: Open Utility Manager
Windows + Q: Quick switching of users (Powertoys only)
Windows + Q: Hold Windows Key, then tap Q to scroll thru the different users on your pc
Change your cd key
==================
You don't need to re-install if you want to try the key out ... just do this:
1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter NOT ALLOWED ~ Zabref
5. Click "Update"
Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.
Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.
Remove the Shared Documents folders from My Computer
====================================================
One of the most annoying things about the new Windows XP user interface is that Microsoft saw fit to provide links to all of the Shared Documents folders on your system, right at the top of the My Computer window. I can't imagine why this would be the default, even in a shared PC environment at home, but what's even more annoying is that you cannot change this behavior through the sh*ll
: Those icons are stuck there and you have to live with it.
Until now, that is.
Simply fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You'll see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this, all of the Shared Documents folders (which are normally under the group called "Other Files Stored on This Computer" will be gone.
You do not need to reboot your system to see the change.
Before: A cluttered mess with icons no one will ever use (especially that orpaned one). After: Simplicity itself, and the way it should be by default.
This tip For older XP builds
===================
Edit or remove the "Comments" link in window title bars
During the Windows XP beta, Microsoft has added a "Comments?" hyperlink to the title bar of each window in the system so that beta testers can more easily send in a problem report about the user interface. But for most of us, this isn't an issue, and the Comments link is simply a visual distraction. And for many programs that alter the title bar, the Comments link renders the Minimize, Maximize, and Close window buttons unusable, so it's actually a problem.
Let's get rid of it. Or, if you're into this kind of thing, you can edit it too.
Open the Registry Editor and navigate to the following keys:
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonEnabled
My Computer \ HKEY_CURRENT_USER \ Control Panel \ Desktop \ LameButtonText
The first key determines whether the link appears at all; change its value to 0 to turn it off. The second key lets you have a little fun with the hyperlink; you can change the text to anything you'd like, such as "Paul Thurrott" or whatever.
Editing either value requires a restart before the changes take effect.
Before: An unnecessary hyperlink. Have some fun with it! Or just remove it entirely. It's up to you.
Rip high-quality MP3s in Windows Media Player 8
================================================
The relationship between Windows Media Player 8 and the MP3 audio format is widely misunderstood. Basically, WMP8 will be able to playback MP3 files, but encoding (or "ripping" CD audio into MP3 format will require an MP3 plug-in. So during the Windows XP beta, Microsoft is supplying a sample MP3 plug-in for testing purposes, but it's limited to 56 Kbps rips, which is pretty useless. However, if you have an externally installed MP3 codec, you can use WMP8 to rip at higher bit rates. But you'll have to edit the Registry to make this work.
Fire up the Registry Editor and navigate to the following key:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ MediaPlayer \ Settings \ MP3Encoding
Here, you'll see sub-keys for LowRate and LowRateSample, which of course equates to the single 56 Kbps sample rate you see in WMP8. To get better sampling rates, try adding the following keys (Using New then DWORD value):
"LowRate" = DWORD value of 0000dac0
"MediumRate" = DWORD value of 0000fa00
"MediumHighRate" = DWORD value of 0001f400
"HighRate" = DWORD value of 0002ee00
Now, when you launch WMP8 and go into Tools, then Options, then Copy Music, you will have four encoding choices for MP3: 56 Kbps, 64 Kbps, 128 Kbps, and 192 Kbps. Note that you will not get higher bit rate encoding unless you have installed an MP3 codec separately; the version in Windows Media Player 8 is limited to 56 Kbps only.
Find the appropriate location in the Registry... ...add a few DWORD values... ...And then you'll be ripping CDs in higher-quality MP3 format!
Speed up the Start Menu
=======================
The default speed of the Start Menu is pretty slow, but you can fix that by editing a Registry Key. Fire up the Registry Editor and navigate to the following key:
HKEY_CURRENT_USER \ Control Panel \ Desktop \ MenuShowDelay
By default, the value is 400. Change this to a smaller value, such as 0, to speed it up.
Speed up the Start Menu (Part two)
==================================
If your confounded by the slow speed of the Start Menu, even after using the tip above, then you might try the following: Navigate to Display Properties then Appearance then Advanced and turn off the option titled Show menu shadow . You will get much better overall performance.
Speed up Internet Explorer 6 Favorites
======================================
For some reason, the Favorites menu in IE 6 seems to slow down dramatically sometimes--I've noticed this happens when you install Tweak UI 1.33, for example, and when you use the preview tip to speed up the Start menu. But here's a fix for the problem that does work, though it's unclear why:
Just open a command line window (Start button -> Run -> cmd) and type sfc, then hit ENTER. This command line runs the System File Checker, which performs a number of services, all of which are completely unrelated to IE 6. But there you go: It works.
Do an unattended installation
=============================
The Windows XP Setup routine is much nicer than that in Windows 2000 or Windows Me, but it's still an hour-long process that forces you to sit in front of your computer for an hour, answering dialog boxes and typing in product keys. But Windows XP picks up one of the more useful features from Windows 2000, the ability to do an unattended installation, so you can simply prepare a script that will answer all those dialogs for you and let you spend some quality time with your family.
I've written about Windows 2000 unattended installations and the process is pretty much identical on Windows XP, so please read that article carefully before proceeding. And you need to be aware that this feature is designed for a standalone Windows XP system: If you want to dual-boot Windows XP with another OS, you're going to have to go through the interactive Setup just like everyone else: An unattended install will wipe out your hard drive and install only Windows XP, usually.
To perform an unattended installation, you just need to work with the Setup Manager, which is located on the Windows XP CD-ROM in D:\SupportTools\DEPLOY.CAB by default: Extract the contents of this file and you'll find a number of useful tools and help files; the one we're interested in is named setupmgr.exe. This is a very simple wizard application that will walk you through the process of creating an answer file called winnt.sif that can be used to guide Windows XP Setup through the unattended installation.
One final tip: There's one thing that Setup Manager doesn't add: Your product key. However, you can add this to the unattend.txt file manually. Simply open the file in Notepad and add the following line under the [UserData] section:
ProductID=RK7J8-2PGYQ-P47VV-V6PMB-F6XPQ
(This is a 60 day cd key)
Then, just copy winnt.sif to a floppy, put your Windows XP CD-ROM in the CD drive, and reboot: When the CD auto-boots, it will look for the unattend.txt file in A: automatically, and use it to answer the Setup questions if it's there.
Finally, please remember that this will wipe out your system! Back up first, and spend some time with the help files in DEPLOY.CAB before proceeding.
For Older builds or not using setupreg.hiv file
===============================================
Remove the Desktop version text
During the Windows XP beta, you will see text in the lower right corner of the screen that says Windows XP Professional, Evaluation Copy. Build 2462 or similar. A lot of people would like to remove this text for some reason, and while it's possible to do so, the cure is more damaging than the problem, in my opinion. So the following step will remove this text, but you'll lose a lot of the nice graphical effects that come in Windows XP, such as the see-through icon text.
To remove the desktop version text, open Display Properties (right-click the desktop, then choose Properties) and navigate to the Desktop page. Click Customize Desktop and then choose the Web page in the resulting dialog. On this page, check the option titled Lock desktop items. Click OK to close the dialog, and then OK to close Display Properties. The text disappears. But now the rest of your system is really ugly. You can reverse the process by unchecking Lock desktop items.
There's also a shortcut for this process: Just right-click the desktop and choose Arrange by then Lock Web Icons on the Desktop.
--------------------------------------------------------------------------------
Enable ClearType on the Welcome Screen!
=======================================
As laptop users and other LCD owners are quickly realizing, Microsoft's ClearType technology in Windows XP really makes a big difference for readability. But the this feature is enabled on a per-user basis in Windows XP, so you can't see the effect on the Welcome screen; it only appears after you logon.
But you can fix that. Fire up the Registry Editor and look for the following keys:
(default user) HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothing (String Value)
HKEY_USERS \ .Default \ Control Panel \ Desktop \ FontSmoothingType (Hexadecimal DWORD Value)
Make sure both of these values are set to 2 and you'll have ClearType enabled on the Welcome screen and on each new user by default.
Stop Windows Messenger from Auto-Starting
=========================================
If you're not a big fan of Windows Messenger simply delete the following Registry Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS
Display Hibernate Option on the Shut Down dialog
================================================
For some reason, Hibernate may not be available from the default Shut Down dialog. But you can enable it simply enough, by holding down the SHIFT key while the dialog is visible. Now you see it, now you don't!
Add album art to any music folder
=================================
One of the coolest new features in Windows XP is its album thumbnail generator, which automatically places the appropriate album cover art on the folder to which you are copying music (generally in WMA format). But what about those people that have already copied their CDs to the hard drive using MP3 format? You can download album cover art from sites such as cdnow.com or amguide.com, and then use the new Windows XP folder customize feature to display the proper image for each folder. But this takes time--you have to manually edit the folder properties for every single folder--and you will lose customizations if you have to reinstall the OS. There's an excellent fix, however.
When you download the album cover art from the Web, just save the images as folder.jpg each time and place them in the appropriate folder. Then, Windows XP will automatically use that image as the thumbnail for that folder and, best of all, will use that image in Windows Media Player for Windows XP (MPXP) if you choose to display album cover art instead of a visualization. And the folder customization is automatic, so it survives an OS reinstallation as well. Your music folders never looked so good!
Album cover art makes music folder thumbnails look better than ever!
Change the location of the My Music or My Pictures folders
==========================================================
In Windows 2000, Microsoft added the ability to right-click the My Documents folder and choose a new location for that folder in the sh*ll
. With Windows XP, Microsoft has elevated the My Music and My Pictures folders to the same "special sh*ll
folder" status of My Documents, but they never added a similar (and simple) method for changing those folder's locations. However, it is actually pretty easy to change the location of these folders, using the following method.
Open a My Computer window and navigate to the location where you'd like My Music (or My Pictures) to reside. Then, open the My Documents folder in a different window. Drag the My Music (or My Pictures) folder to the other window, and Windows XP will update all of the references to that folder to the new location, including the Start menu.
Or use Tweak UI
Add/Remove optional features of Windows XP
==========================================
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:
[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.
Cool, eh? There are even more new options now under "Accessories and Utilities" too.
Remove Windows Messenger
========================
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
Windows XP Startup and Performance Tweaks
Windows XP is now the predominant consumer OS of both gamers and power users. Sure, many of us still dual-boot with Win9x, because it is faster for many games, but the joy of a true 32-bit operating system with full consumer support is too much for many of us to remain loyal to NT 4.0 or Windows 2000. Now that Windows XP has matured past its infancy and many (but by far not all) of the bugs have been shaken out of it, Ars Technica brings you the first in a series of tweak guides for this illustrious and yet somewhat finicky OS.
This first guide aims to cover two main areas of contention: the boot process (sans the system services, which are an entire guide of their own) and a mishmash of general computing tweaks. The boot tweaks will be comprised of not only system settings, but also several under-utilized applications that can dramatically reduce load time. The general performance tweaks are simply various tweaks that do not quite fit in with the theme of this article, but still have a significant effect on system startup performance (because most any tweaks that one performs should have some kind of effect on the startup time of the system).
Before we begin, several pieces of laundry need to be aired out. To begin with, if you have already tweaked the services on the computer in question, please return them to the default settings. One of the applications I am recommending requires that several systems be enabled that most power users frequently disable (e.g., Task Scheduler). Once you have completed the tweaks mentioned in this guide, feel free to return said services back to your preferred settings, as they only need to be enabled for a short time.
View
http://arstechnica.com/tweak/win2k/xp/sgp-tweaks-1.html
This first guide aims to cover two main areas of contention: the boot process (sans the system services, which are an entire guide of their own) and a mishmash of general computing tweaks. The boot tweaks will be comprised of not only system settings, but also several under-utilized applications that can dramatically reduce load time. The general performance tweaks are simply various tweaks that do not quite fit in with the theme of this article, but still have a significant effect on system startup performance (because most any tweaks that one performs should have some kind of effect on the startup time of the system).
Before we begin, several pieces of laundry need to be aired out. To begin with, if you have already tweaked the services on the computer in question, please return them to the default settings. One of the applications I am recommending requires that several systems be enabled that most power users frequently disable (e.g., Task Scheduler). Once you have completed the tweaks mentioned in this guide, feel free to return said services back to your preferred settings, as they only need to be enabled for a short time.
View
http://arstechnica.com/tweak/win2k/xp/sgp-tweaks-1.html
Hacking Windows XP Registry
Way to Hacking Windows XP Registry
Structure of Windows XP Registry :
When you will open the Windows XP Registry , you will see it's divided into two panes. On the left side there are Five main
Keys as shown below. These can be expanded to several Sub-Keys, which further has many Sub-Keys.
+HKEY_CLASSES_ROOT
+HKEY_CURRENT_USER
+HKEY_LOCAL_MACHINE
+HKEY_USERS
+HKEY_CURRENT_CONFIG
Before you try out the Tweaks, learn how to Backup and Restore Windows XP Registry.
Types of Registry Backups :
It?s very important that before you do editing you make a backup of the current registry. If you ignore this warning, it might prove deadly for you?so better listen to me J
Open your registry. Go to Start>Run , type regedit . When you invoke the Export function from File>Export, you are given a choice of different file types that can be saved :
Registration Files (*.reg)
Registry Hive Files (*.*)
Text Files (*.txt)
Win9x/NT 4 Registration Files (*.reg)
All Files
Each one of the different file types above plays an important role in how the data you export is saved. Choosing the wrong type can give you unexpected results. So let me explain you quickly these file types.
Registrations Files : The Registration Files option creates a .reg file. This is the most well known file format used for backing up the registry. The Registration File can be used in two ways. As a text file it can be read and edited using Notepad outside of Registry Editor. Once the changes have been made and saved, right clicking the file and using the [Merge] command adds the changed file back into the registry. If you make additions to the registry using regedit and then merge the previously saved Registration File, anything that you've added via regedit will not be removed, but changes you make to data using regedit that previously existed in the saved Registration File will be overwritten when it is merged
Registry Hive Files : Unlike the Registration Files option above, the Registry Hive Files option creates a binary image of the selected registry key. The image file is not editable via Notepad nor can you view its contents using a text editor. However, what the Registry Hive Files format does is create an image perfect view of the selected key and allow you to import it back into the registry to insure any problematic changes you made are eliminated.
Text Files : This option does just as the name suggests. It creates a text file containing the information in the selected key. It's most useful purpose is creating a record or snapshot of a key at a particular point in time that you can refer back to if necessary. It cannot be merged back into the registry like a Registration File.
Win9x/NT 4 Registration Files : This option creates a .reg file in the same manner used by the Registration Files option. It's used by previous Windows versions and serves no purpose in XP unless you want to merge a key from XP into a previous version of Windows.
Out of the give above choices , the safest method of backing up registry is to use Registry Hive Files option. No matter what ever you do or goes wrong in editing, importing the image of the key will eliminate all changes.
**Note-> I have included the exact name/value between [ ] brackets. [ & ] should be ignored, only the data inside them should be considered.
1. Customize Windows Media Player Title Bar
Change the title bar to read Windows Media Player provided by, so if I had entered text ?Abhishek Bhuyan? , it would read: Windows Media Player provided by Abhishek Bhuyan
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Policies\Microsoft
Create the Key [WindowsMediaPlayer]
Create String value named [TitleBar]
Data Type: REG_SZ // Value Name: TitleBar
Double click TitleBar and Enter the text to be displayed in the title bar.
Exit Registry / Reboot
2. Minimize Outlook 2002 to the System Tray
If you frequently access Outlook during the day it?s more convenient to have it minimized to the system tray rather than invoking it each time you need to send/receive e-mail. This tweak minimizes Outlook 2002 to the system tray:
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Preferences
Modify/Create Data Type DWORD named [MinToTray]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
3. Specify Default IE Download Directory
This tweak changes the default directory where downloads initiated in Internet Explorer are stored on the system.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer
Modify/Create String Value of Data type REG_SZ Named [Download Directory]
Value Data: [Enter Path to Directory to be Assigned as Defualt for Downloads]
Exit Registry / Reboot
4. Force Use of Classic Start Menu
This tweak loads the Classic Start Menu and makes it impossible to change back to the Windows XP version
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create the DWORD Value of Data type REG_DWORD Named [NoSimpleStartMenu]
Value Data: [0 = Default / 1 = Force Classic Start Menu]
Exit Registry / Reboot
5. Hide/Show Internet Explorer Desktop Icon
By default, Windows XP does not show the Internet Explorer icon on the Windows desktop. Using the registry tweak below allows you to control whether or not the Internet Explorer icon is displayed.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoInternetIcon]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
6. Increase Menu Display Speed
When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.
The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Control Panel\Desktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot
7. Change the Location of Special Folders
This tweak allows changing the location of special folders on the system. Any of the folders listed in the registry key may be moved.
[Start] [Run] [Regedit]
Go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\UserShell Folders
Modify/Create String value of Data type REG_SZ Named [Various Folder Names]
Data Type: REG_SZ [String Value] // Value Name: Consult RegEdit for Folder Names
Value Data: [Move the folder to the new desired location using explorer, and then edit the matching folder in RegEdit to reflect the new folder location]
Exit Registry and Reboot
8. Faster Browsing in Windows Explorer on Network Computers
By default, a Windows XP machine connecting to a Windows 95/98/Me computer will search for scheduled tasks or enabled printers on the remote computer. Two sub-keys control this behavior. Deleting them will speed up browsing on the remote computer.
[Start] [Run] [Regedit]
Go to : HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace
To Disable Scheduled Task Checking
Value Name: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Delete the sub-key in the left pane of Registry Editor
To Disable Printer Checking
Value Name: {2227A280-3AEA-1069-A2DE-08002B30309D}
Delete the sub-key in the left pane of Registry Editor
Exit Registry / Reboot
9. Add Administrator Account to Log In Screen
When Windows XP is first installed it requires you to enter at least one name of a user who will access the computer. Once you create this name the default Administrator account vanishes. To access it, press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard Windows 2000 logon dialog. Log on as Administrator from this point. To log the Administrator off, click [Start] [Log Off] and [Log Off] when the [Log Off Windows] selection box appears. The Log On screen with the available users will be displayed.
To Make the Administrator Account Always Visible on the Login Screen use this Registry Tweak.
[Start] [Run] [Regedit]
Go to: HKEY_LOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Administrator]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
10. Increase Internet Download Connections
Increase Simultaneous Internet Download Connections. Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPer1_0Server]
Setting for Value Data: [0000000a]
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPerServer]
Setting for Value Data: [0000000a]
Exit Registry / Reboot
11. Connected Web Files and Folders
Connecting web files and folders allows a primary .htm or .html file to be moved in conjunction with files associated with the primary document. Once the primary document has been defined, create a sub-folder using the same name as the primary document but assign it a .files extension. Whenever the primary file is moved, the sub-folder will also move and remain as a sub-folder of the primary.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoFileFolderConnection]
Setting for Value Data: [0 = Enabled (Default) / 1 = Disabled]
Exit Registry / Reboot
12. Hide/Show My Documents Folder on Desktop
By default, Windows XP does not show the My Documents folder on the Windows desktop. Using the registry tweak below allows you to control whether or not My Documents is displayed.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\{450D8FBA-AD25-11D0-98A8-0800361B1103}\ShellFolder
Modify/Create DWORD Value of Data type REG_DWORD Named [Attributes]
Setting for Value Data: [Default = 0xf0400174 / Hidden = 0xf0500174]
Exit Registry / Reboot
13. Create a Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.
14. Create Legal Notice Logon Dialog Box
In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.
Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption]
Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]
Exit Registry / Reboot
15. Manage Internet Explorer Error Reporting
This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main
Note:- Create both values listed below and set according to the bold type for the tweak to function properly.
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled]
Value Data: [0 - Disabled / 1 - Enabled]
Exit Registry / Reboot
16. Customize Logon and Security Dialog Title
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
17. Customize Logon Box Message
This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]
Exit Registry / Reboot
18. Welcome Screen Logon Vs Classic Logon
This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]
Exit Registry / Reboot
19. QoS (Quality Of Service) Bandwidth Reserve Setting
By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Psched\Parameters\Adapters\{Adpater-ID} rather than HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched
Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]
Exit Registry / Reboot
20. Enable/Disable Save Password in DUN
This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\Parameters
Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]
Exit Registry / Reboot
21. Change the Registered Organization/Owner of Windows XP
This tweak allows modification of the registered owner and organization of the Windows XP software.
Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]
Exit Registry / Reboot
22. Remove Links Folder in Favorites
The Links folder is part of Favorites whether it's being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar
Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]
Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.
Exit Registry / Reboot
23. Enable/Disable Active Window Tracking to Mouse Movements
When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Control Panel\Mouse
Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]
Exit Registry / Reboot
24. Auto Disconnect for Internet Explorer
Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don?t like using your computer with net J
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry / Reboot
25. Auto Reboot on System Crash
By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]
Exit Registry / Reboot
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[System Properties may also be opened using the WinKey+Pause key combination]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit
26. Modify Control Panel Categories
Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It's possible.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\{305CA226-D286-468e-B848-2B2E8E697B74} 2
Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]
Setting for Value Data: [Select the value from table below]
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
Exit Registry / Reboot
To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren't already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.
27. Enable/Disable Run Commands Specific to the Registry
This tweak controls the use of the Run command on the local machine
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ Policies\Explorer
Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.
Modify/Create the Value Name [DisableLocalMachineRun]
Modify/Create the Value Name [DisableLocalMachineRunOnce]
Modify/Create the Value Name [DisableCurrentUserRun]
Modify/Create the Value Name [DisableCurrentUserRunOnce]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
28. Enable/Disable System Properties Access from My Computer
This tweak removes access to System Properties via My Computer as well as via Control Panel.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]
Exit Registry / Reboot
29. Uninstall Programs Manually
Just because Windows XP has the Add/Remove Programs feature it doesn't mean your application will appear in the list. Furthermore, even if it does appear, it's no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.
Find the directory for the application and delete all the files in the directory. Delete the directory.
Open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE and find the folder for the application. Delete the folder.
Open regedit and navigate to HKEY_CURRENT_USER\SOFTWARE and find the folder for the application. Delete the folder.
To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and find the folder for the application. Delete the folder.
Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services, locate and delete the service.
In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be:
C:\Documents and Settings\All Users\Start Menu\Programs and delete relevant entries.
C:\Documents and Settings\All Users\Start Menu\Programs\Startup and delete relevant entries.
C:\Documents and Settings\%YourUserID%\Start Menu\Programs and delete relevant entries.
[Do this for each User ID listed]
C:\Documents and Settings\%YourUserID%\Start Menu\Programs\Startup and delete relevant entries.
[Do this for each User ID listed]
If no entries were found in the previous step and the application launches automatically, navigate to
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
and delete the entry.
30. Create a right-click command prompt option
You can right-click a folder to get a list of actions you can apply to it. Here?s a way to create an action on that right-click menu that opens a command prompt window with that folder as the current directory. In a text editor such as Notepad, type the following exactly:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder\shell\Cmd Here]
@=?Command &Prompt Here?
[HKEY_CLASSES-ROOT\Folder\shell\Cmd Here\command]
@=?cmd.exe /k pushd %L?
Save the file with any name you want, with a .reg extension. Then double-click the saved file and choose Yes to merge the file?s information into the Registry. You can delete the file. Right-click any folder and you?ll see the CommandPrompt Here option.
31. Adjusting System Restore values
The new System Restore feature in Windows XP automatically backs up a snapshot of your system, including your Registry, every 24 hours. It also saves restore points for 90 days. Neither of these values is directly editable in the System Restore program, but you can change them in the Registry. Go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\SystemRestore
You?ll find an assortment of settings here. To change the interval between automatically created restore points, change the RPGlobalInterval setting. To change the number of days that a restore point is retained, change the RPLifeInterval setting.
System Restore time intervals are measured in seconds, not days, so you must convert the number of days you want into seconds. There are 86,400 seconds in a day, so multiply 86,400 by the number of days you want to determine the value. (There are 3,600 seconds in an hour, I hope you know)
32. Erase the swap file at shutdown
You might be concerned about someone browsing your users? swap files and gathering up little bits of their sensitive data. A remote possibility, to be sure, but it could happen. For that extra measure of security, go to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Memory Management
Set the ClearPageFileAtShutdown DWORD to 1. This will make shutdowns take longer, because it overwrites everything in the swap file with zeroes. Don?t turn this feature on unless you have a serious security threat.
33. Delete the Files Stored on This Computer category in the My Computer window
In Windows XP, the My Computer window?s listing is broken down by categories: Hard Disk Drives, Devices with Removable Storage, and so on. One of these categories is Files Stored on This Computer, which appears at the top of the My Computer window. If a user doesn?t need it , you can get rid of it. To do so, go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\
NameSpace\Delegate Folders
Delete the {59031a47-3f72-44a7-89c55595fe6b30ee} subkey to remove the category.
34. Change the desktop cleanup frequency
Through Display Properties (Desktop tab, Customize Desktop button, General tab), you can turn on and off a feature that runs the Desktop Cleanup Wizard every 60 days. You don?t have an option to set a different interval there, but you can change the interval in the Registry. To do so, go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Desktop\CleanupWiz
Change the Days Between Clean Up Value to some other number of days (in decimal format).
35. Sort menus alphabetically
When you install a new program for a user, it doesn?t find its place in the alphabetical Start menu hierarchy right away; it hangs out at the bottom for a little while. If your users employ the Classic Start menu, they can re-alphabetize it manually by right-clicking the taskbar and choosing Properties, clicking the Customize button next to the Classic Start Menu, and clicking the Sort button. With the Windows XP style of Start menu, however, you don?t have an equivalent button. To make Windows always alphabetize the list, remove the permissions from the Registry key that controls the sort order for the Start menu. To do so, go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder
Choose Edit | Permissions and click the Advanced button. Deselect the Inherit From Parent The Permission Entries That Apply To Child Objects check box and then click Copy when the Security dialog box pops up. Click OK and clear the Full Control entry for your account and all security groups you are a member of. Leave only Read permission.
36. Prevent programs from loading at startup
Remember back in the good old days of Windows 3.1 when you could open up the Win.ini file in a text editor and remove an item from the RUN= line to disable it from running at startup? With Windows 9x and above, the Win.ini file became less useful because 32-bit programs were set to run at startup from within the Registry instead.
One way to selectively disable programs from loading at startup is to use MSCONFIG (from the Run command) to deselect certain items. Another way to remove them is to edit the Registry directly. Consider the following locations:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
for applications that start up for all users
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
for applications that start up when the current user logs on
Remove the entry for a program by right-clicking it and selecting Delete to prevent it from loading.
37. Change categories in the Control Panel
Windows XP?s Control Panel is broken down by category in the default Category view, but the group to which an item belongs is not always obvious. If you disagree with Microsoft?s assignments, you can switch them around. To assign a different category to an item, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\
{305CA226-D286-468e-B848-2B2E8E697B74} 2
Find the item you want to change and double-click it to bring up a dialog box. Change the item?s DWORD value to your preference. Use the Table given below as a guide (shown with decimal numbers, which is the way you should enter them).
DWORD value to set
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
38. Grouping multiple open windows
Windows XP will group multiple open windows (IE windows for example) into one group on the task bar to keep the taskbar clear. This can be annoying at times - especially when comparing different web pages because you have to go back to the task bar, click on the group and then click on the page you want and then you only get one page because you have to click on each one separately. I think the default for this is 8 windows - any combination of apps or utilities open.
You can modify this behavior by adding this registry key at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
add a Dword value of type REG_DWORD named [TaskbarGroupSize]
modify "TaskbarGroupSize" entry to be the number of windows you want open before XP starts to group them on the task bar.
A value of 2 will cause the Taskbar buttons to always group
Another tweak is to disable or enable recent documents history. This can be done at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
this key should already be present - if it isn't you'll need to add it:
Add a Binary value of type REG_BINARY named [NoRecentDocsHistory]
modify it so that value reads 01 00 00 00
39. Disable Tips
To disable Ballon tips in Windows XP do this registry tweak
Go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
Create a new DWORD value, name it EnableBalloonTips, and set it equal to 0. If EnableBalloonTips is already there and equal to 1, set it equal to 0. Quit the registry editor, log off, and log back on. Voila! Your computer will stop talking down to you.
40. Add/Remove optional features of Windows XP
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf and open the sysoc.inf file. {Opps , if you didn?t find the inf directory, you are right. It?s a hidden folder, so go to Tools>Folder Options> View , enable Show Hidden Files & Folders.}
[Version]
Signature = "$Windows NT$"
DriverVer=07/01/2001,5.1.2600.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, re launch Add/Remove Windows Components,
41. Remove Windows Messenger
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
42. Rename multiple files ( it is not a Registry tweak though. I thought this to be really cool, so I have put it here)
A new, small, neat feature for Windows XP deals with renaming files. I personally have always wanted the OS to include a way to do a mass file renaming on a bunch of files. You can now rename multiple files at once .Its really simple:
Select several files in Explorer, press F2 and rename one of those files to something else. All the selected files get renamed to the new file name (plus a number added to the end). Simple J
I hope you enjoyed the above Registry tricks ! May be next time I?ll come up with more. That's all for now .
To know more tricks + topics on Hacking, Security, Programming.
Structure of Windows XP Registry :
When you will open the Windows XP Registry , you will see it's divided into two panes. On the left side there are Five main
Keys as shown below. These can be expanded to several Sub-Keys, which further has many Sub-Keys.
+HKEY_CLASSES_ROOT
+HKEY_CURRENT_USER
+HKEY_LOCAL_MACHINE
+HKEY_USERS
+HKEY_CURRENT_CONFIG
Before you try out the Tweaks, learn how to Backup and Restore Windows XP Registry.
Types of Registry Backups :
It?s very important that before you do editing you make a backup of the current registry. If you ignore this warning, it might prove deadly for you?so better listen to me J
Open your registry. Go to Start>Run , type regedit . When you invoke the Export function from File>Export, you are given a choice of different file types that can be saved :
Registration Files (*.reg)
Registry Hive Files (*.*)
Text Files (*.txt)
Win9x/NT 4 Registration Files (*.reg)
All Files
Each one of the different file types above plays an important role in how the data you export is saved. Choosing the wrong type can give you unexpected results. So let me explain you quickly these file types.
Registrations Files : The Registration Files option creates a .reg file. This is the most well known file format used for backing up the registry. The Registration File can be used in two ways. As a text file it can be read and edited using Notepad outside of Registry Editor. Once the changes have been made and saved, right clicking the file and using the [Merge] command adds the changed file back into the registry. If you make additions to the registry using regedit and then merge the previously saved Registration File, anything that you've added via regedit will not be removed, but changes you make to data using regedit that previously existed in the saved Registration File will be overwritten when it is merged
Registry Hive Files : Unlike the Registration Files option above, the Registry Hive Files option creates a binary image of the selected registry key. The image file is not editable via Notepad nor can you view its contents using a text editor. However, what the Registry Hive Files format does is create an image perfect view of the selected key and allow you to import it back into the registry to insure any problematic changes you made are eliminated.
Text Files : This option does just as the name suggests. It creates a text file containing the information in the selected key. It's most useful purpose is creating a record or snapshot of a key at a particular point in time that you can refer back to if necessary. It cannot be merged back into the registry like a Registration File.
Win9x/NT 4 Registration Files : This option creates a .reg file in the same manner used by the Registration Files option. It's used by previous Windows versions and serves no purpose in XP unless you want to merge a key from XP into a previous version of Windows.
Out of the give above choices , the safest method of backing up registry is to use Registry Hive Files option. No matter what ever you do or goes wrong in editing, importing the image of the key will eliminate all changes.
**Note-> I have included the exact name/value between [ ] brackets. [ & ] should be ignored, only the data inside them should be considered.
1. Customize Windows Media Player Title Bar
Change the title bar to read Windows Media Player provided by
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Policies\Microsoft
Create the Key [WindowsMediaPlayer]
Create String value named [TitleBar]
Data Type: REG_SZ // Value Name: TitleBar
Double click TitleBar and Enter the text to be displayed in the title bar.
Exit Registry / Reboot
2. Minimize Outlook 2002 to the System Tray
If you frequently access Outlook during the day it?s more convenient to have it minimized to the system tray rather than invoking it each time you need to send/receive e-mail. This tweak minimizes Outlook 2002 to the system tray:
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Preferences
Modify/Create Data Type DWORD named [MinToTray]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
3. Specify Default IE Download Directory
This tweak changes the default directory where downloads initiated in Internet Explorer are stored on the system.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer
Modify/Create String Value of Data type REG_SZ Named [Download Directory]
Value Data: [Enter Path to Directory to be Assigned as Defualt for Downloads]
Exit Registry / Reboot
4. Force Use of Classic Start Menu
This tweak loads the Classic Start Menu and makes it impossible to change back to the Windows XP version
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create the DWORD Value of Data type REG_DWORD Named [NoSimpleStartMenu]
Value Data: [0 = Default / 1 = Force Classic Start Menu]
Exit Registry / Reboot
5. Hide/Show Internet Explorer Desktop Icon
By default, Windows XP does not show the Internet Explorer icon on the Windows desktop. Using the registry tweak below allows you to control whether or not the Internet Explorer icon is displayed.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoInternetIcon]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
6. Increase Menu Display Speed
When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.
The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USER\Control Panel\Desktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot
7. Change the Location of Special Folders
This tweak allows changing the location of special folders on the system. Any of the folders listed in the registry key may be moved.
[Start] [Run] [Regedit]
Go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\UserShell Folders
Modify/Create String value of Data type REG_SZ Named [Various Folder Names]
Data Type: REG_SZ [String Value] // Value Name: Consult RegEdit for Folder Names
Value Data: [Move the folder to the new desired location using explorer, and then edit the matching folder in RegEdit to reflect the new folder location]
Exit Registry and Reboot
8. Faster Browsing in Windows Explorer on Network Computers
By default, a Windows XP machine connecting to a Windows 95/98/Me computer will search for scheduled tasks or enabled printers on the remote computer. Two sub-keys control this behavior. Deleting them will speed up browsing on the remote computer.
[Start] [Run] [Regedit]
Go to : HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace
To Disable Scheduled Task Checking
Value Name: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Delete the sub-key in the left pane of Registry Editor
To Disable Printer Checking
Value Name: {2227A280-3AEA-1069-A2DE-08002B30309D}
Delete the sub-key in the left pane of Registry Editor
Exit Registry / Reboot
9. Add Administrator Account to Log In Screen
When Windows XP is first installed it requires you to enter at least one name of a user who will access the computer. Once you create this name the default Administrator account vanishes. To access it, press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard Windows 2000 logon dialog. Log on as Administrator from this point. To log the Administrator off, click [Start] [Log Off] and [Log Off] when the [Log Off Windows] selection box appears. The Log On screen with the available users will be displayed.
To Make the Administrator Account Always Visible on the Login Screen use this Registry Tweak.
[Start] [Run] [Regedit]
Go to: HKEY_LOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Administrator]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
10. Increase Internet Download Connections
Increase Simultaneous Internet Download Connections. Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPer1_0Server]
Setting for Value Data: [0000000a]
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPerServer]
Setting for Value Data: [0000000a]
Exit Registry / Reboot
11. Connected Web Files and Folders
Connecting web files and folders allows a primary .htm or .html file to be moved in conjunction with files associated with the primary document. Once the primary document has been defined, create a sub-folder using the same name as the primary document but assign it a .files extension. Whenever the primary file is moved, the sub-folder will also move and remain as a sub-folder of the primary.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoFileFolderConnection]
Setting for Value Data: [0 = Enabled (Default) / 1 = Disabled]
Exit Registry / Reboot
12. Hide/Show My Documents Folder on Desktop
By default, Windows XP does not show the My Documents folder on the Windows desktop. Using the registry tweak below allows you to control whether or not My Documents is displayed.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\{450D8FBA-AD25-11D0-98A8-0800361B1103}\ShellFolder
Modify/Create DWORD Value of Data type REG_DWORD Named [Attributes]
Setting for Value Data: [Default = 0xf0400174 / Hidden = 0xf0500174]
Exit Registry / Reboot
13. Create a Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it's necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon\SpecialAccounts\UserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:\Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.
14. Create Legal Notice Logon Dialog Box
In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.
Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption]
Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]
Exit Registry / Reboot
15. Manage Internet Explorer Error Reporting
This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main
Note:- Create both values listed below and set according to the bold type for the tweak to function properly.
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled]
Value Data: [0 - Disabled / 1 - Enabled]
Exit Registry / Reboot
16. Customize Logon and Security Dialog Title
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
17. Customize Logon Box Message
This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\ CurrentVersion\Winlogon
Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]
Exit Registry / Reboot
18. Welcome Screen Logon Vs Classic Logon
This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]
Exit Registry / Reboot
19. QoS (Quality Of Service) Bandwidth Reserve Setting
By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Psched\Parameters\Adapters\{Adpater-ID} rather than HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Psched
Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]
Exit Registry / Reboot
20. Enable/Disable Save Password in DUN
This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\Parameters
Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]
Exit Registry / Reboot
21. Change the Registered Organization/Owner of Windows XP
This tweak allows modification of the registered owner and organization of the Windows XP software.
Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]
Exit Registry / Reboot
22. Remove Links Folder in Favorites
The Links folder is part of Favorites whether it's being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar
Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]
Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.
Exit Registry / Reboot
23. Enable/Disable Active Window Tracking to Mouse Movements
When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Control Panel\Mouse
Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]
Exit Registry / Reboot
24. Auto Disconnect for Internet Explorer
Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don?t like using your computer with net J
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry / Reboot
25. Auto Reboot on System Crash
By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CrashControl
Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]
Exit Registry / Reboot
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[System Properties may also be opened using the WinKey+Pause key combination]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit
26. Modify Control Panel Categories
Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It's possible.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\{305CA226-D286-468e-B848-2B2E8E697B74} 2
Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]
Setting for Value Data: [Select the value from table below]
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
Exit Registry / Reboot
To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren't already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.
27. Enable/Disable Run Commands Specific to the Registry
This tweak controls the use of the Run command on the local machine
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\ Policies\Explorer
Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.
Modify/Create the Value Name [DisableLocalMachineRun]
Modify/Create the Value Name [DisableLocalMachineRunOnce]
Modify/Create the Value Name [DisableCurrentUserRun]
Modify/Create the Value Name [DisableCurrentUserRunOnce]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot
28. Enable/Disable System Properties Access from My Computer
This tweak removes access to System Properties via My Computer as well as via Control Panel.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]
Exit Registry / Reboot
29. Uninstall Programs Manually
Just because Windows XP has the Add/Remove Programs feature it doesn't mean your application will appear in the list. Furthermore, even if it does appear, it's no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.
Find the directory for the application and delete all the files in the directory. Delete the directory.
Open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE and find the folder for the application. Delete the folder.
Open regedit and navigate to HKEY_CURRENT_USER\SOFTWARE and find the folder for the application. Delete the folder.
To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and find the folder for the application. Delete the folder.
Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services, locate and delete the service.
In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be:
C:\Documents and Settings\All Users\Start Menu\Programs and delete relevant entries.
C:\Documents and Settings\All Users\Start Menu\Programs\Startup and delete relevant entries.
C:\Documents and Settings\%YourUserID%\Start Menu\Programs and delete relevant entries.
[Do this for each User ID listed]
C:\Documents and Settings\%YourUserID%\Start Menu\Programs\Startup and delete relevant entries.
[Do this for each User ID listed]
If no entries were found in the previous step and the application launches automatically, navigate to
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
and delete the entry.
30. Create a right-click command prompt option
You can right-click a folder to get a list of actions you can apply to it. Here?s a way to create an action on that right-click menu that opens a command prompt window with that folder as the current directory. In a text editor such as Notepad, type the following exactly:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder\shell\Cmd Here]
@=?Command &Prompt Here?
[HKEY_CLASSES-ROOT\Folder\shell\Cmd Here\command]
@=?cmd.exe /k pushd %L?
Save the file with any name you want, with a .reg extension. Then double-click the saved file and choose Yes to merge the file?s information into the Registry. You can delete the file. Right-click any folder and you?ll see the CommandPrompt Here option.
31. Adjusting System Restore values
The new System Restore feature in Windows XP automatically backs up a snapshot of your system, including your Registry, every 24 hours. It also saves restore points for 90 days. Neither of these values is directly editable in the System Restore program, but you can change them in the Registry. Go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\SystemRestore
You?ll find an assortment of settings here. To change the interval between automatically created restore points, change the RPGlobalInterval setting. To change the number of days that a restore point is retained, change the RPLifeInterval setting.
System Restore time intervals are measured in seconds, not days, so you must convert the number of days you want into seconds. There are 86,400 seconds in a day, so multiply 86,400 by the number of days you want to determine the value. (There are 3,600 seconds in an hour, I hope you know)
32. Erase the swap file at shutdown
You might be concerned about someone browsing your users? swap files and gathering up little bits of their sensitive data. A remote possibility, to be sure, but it could happen. For that extra measure of security, go to:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Memory Management
Set the ClearPageFileAtShutdown DWORD to 1. This will make shutdowns take longer, because it overwrites everything in the swap file with zeroes. Don?t turn this feature on unless you have a serious security threat.
33. Delete the Files Stored on This Computer category in the My Computer window
In Windows XP, the My Computer window?s listing is broken down by categories: Hard Disk Drives, Devices with Removable Storage, and so on. One of these categories is Files Stored on This Computer, which appears at the top of the My Computer window. If a user doesn?t need it , you can get rid of it. To do so, go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\
NameSpace\Delegate Folders
Delete the {59031a47-3f72-44a7-89c55595fe6b30ee} subkey to remove the category.
34. Change the desktop cleanup frequency
Through Display Properties (Desktop tab, Customize Desktop button, General tab), you can turn on and off a feature that runs the Desktop Cleanup Wizard every 60 days. You don?t have an option to set a different interval there, but you can change the interval in the Registry. To do so, go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Desktop\CleanupWiz
Change the Days Between Clean Up Value to some other number of days (in decimal format).
35. Sort menus alphabetically
When you install a new program for a user, it doesn?t find its place in the alphabetical Start menu hierarchy right away; it hangs out at the bottom for a little while. If your users employ the Classic Start menu, they can re-alphabetize it manually by right-clicking the taskbar and choosing Properties, clicking the Customize button next to the Classic Start Menu, and clicking the Sort button. With the Windows XP style of Start menu, however, you don?t have an equivalent button. To make Windows always alphabetize the list, remove the permissions from the Registry key that controls the sort order for the Start menu. To do so, go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder
Choose Edit | Permissions and click the Advanced button. Deselect the Inherit From Parent The Permission Entries That Apply To Child Objects check box and then click Copy when the Security dialog box pops up. Click OK and clear the Full Control entry for your account and all security groups you are a member of. Leave only Read permission.
36. Prevent programs from loading at startup
Remember back in the good old days of Windows 3.1 when you could open up the Win.ini file in a text editor and remove an item from the RUN= line to disable it from running at startup? With Windows 9x and above, the Win.ini file became less useful because 32-bit programs were set to run at startup from within the Registry instead.
One way to selectively disable programs from loading at startup is to use MSCONFIG (from the Run command) to deselect certain items. Another way to remove them is to edit the Registry directly. Consider the following locations:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run
for applications that start up for all users
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
for applications that start up when the current user logs on
Remove the entry for a program by right-clicking it and selecting Delete to prevent it from loading.
37. Change categories in the Control Panel
Windows XP?s Control Panel is broken down by category in the default Category view, but the group to which an item belongs is not always obvious. If you disagree with Microsoft?s assignments, you can switch them around. To assign a different category to an item, go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Extended Properties\
{305CA226-D286-468e-B848-2B2E8E697B74} 2
Find the item you want to change and double-click it to bring up a dialog box. Change the item?s DWORD value to your preference. Use the Table given below as a guide (shown with decimal numbers, which is the way you should enter them).
DWORD value to set
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
38. Grouping multiple open windows
Windows XP will group multiple open windows (IE windows for example) into one group on the task bar to keep the taskbar clear. This can be annoying at times - especially when comparing different web pages because you have to go back to the task bar, click on the group and then click on the page you want and then you only get one page because you have to click on each one separately. I think the default for this is 8 windows - any combination of apps or utilities open.
You can modify this behavior by adding this registry key at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\
add a Dword value of type REG_DWORD named [TaskbarGroupSize]
modify "TaskbarGroupSize" entry to be the number of windows you want open before XP starts to group them on the task bar.
A value of 2 will cause the Taskbar buttons to always group
Another tweak is to disable or enable recent documents history. This can be done at:
HKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
this key should already be present - if it isn't you'll need to add it:
Add a Binary value of type REG_BINARY named [NoRecentDocsHistory]
modify it so that value reads 01 00 00 00
39. Disable Tips
To disable Ballon tips in Windows XP do this registry tweak
Go to : HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced
Create a new DWORD value, name it EnableBalloonTips, and set it equal to 0. If EnableBalloonTips is already there and equal to 1, set it equal to 0. Quit the registry editor, log off, and log back on. Voila! Your computer will stop talking down to you.
40. Add/Remove optional features of Windows XP
To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf and open the sysoc.inf file. {Opps , if you didn?t find the inf directory, you are right. It?s a hidden folder, so go to Tools>Folder Options> View , enable Show Hidden Files & Folders.}
[Version]
Signature = "$Windows NT$"
DriverVer=07/01/2001,5.1.2600.0
[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk.cpl,DisplayOcSetupProc,,7
Fax=fxsocm.dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext.dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
IEAccess=ocgen.dll,OcEntry,ieaccess.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7
[Global]
WindowTitle=%WindowTitle%
WindowTitle.StandAlone="*"
The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, re launch Add/Remove Windows Components,
41. Remove Windows Messenger
It seems that a lot of people are interested in removing Windows Messenger for some reason, though I strongly recommend against this: In Windows XP, Windows Messenger will be the hub of your connection to the .NET world, and now that this feature is part of Windows, I think we're going to see a lot of .NET Passport-enabled Web sites appearing as well. But if you can't stand the little app, there are a couple of ways to get rid of it, and ensure that it doesn't pop up every time you boot into XP. The best way simply utilizes the previous tip:
If you'd like Windows Messenger to show up in the list of programs you can add and remove from Windows, navigate to C:\WINDOWS\inf and open sysoc.inf (see the previous tip for more information about this file). You'll see a line that reads:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
Change this to the following and Windows Messenger will appear in Add or Remove Programs, then Add/Remove Windows Components, then , and you can remove it for good:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
42. Rename multiple files ( it is not a Registry tweak though. I thought this to be really cool, so I have put it here)
A new, small, neat feature for Windows XP deals with renaming files. I personally have always wanted the OS to include a way to do a mass file renaming on a bunch of files. You can now rename multiple files at once .Its really simple:
Select several files in Explorer, press F2 and rename one of those files to something else. All the selected files get renamed to the new file name (plus a number added to the end). Simple J
I hope you enjoyed the above Registry tricks ! May be next time I?ll come up with more. That's all for now .
To know more tricks + topics on Hacking, Security, Programming.
windows hidden applications
WINDOWS XP HIDDEN APPS
To run any of these apps go to Start > Run and type the executable name (ie charmap).
WINDOWS XP HIDDEN APPS:
=========================================
1) Character Map = charmap.exe (very useful for finding unusual characters)
2) Disk Cleanup = cleanmgr.exe
3) Clipboard Viewer = clipbrd.exe (views contents of Windows clipboard)
4) Dr Watson = drwtsn32.exe (Troubleshooting tool)
5) DirectX diagnosis = dxdiag.exe (Diagnose & test DirectX, video & sound cards)
6) Private character editor = eudcedit.exe (allows creation or modification of characters)
7) IExpress Wizard = iexpress.exe (Create self-extracting / self-installing package)
8) Microsoft Synchronization Manager = mobsync.exe (appears to allow synchronization of files on the network for when working offline. Apparently undocumented).
9) Windows Media Player 5.1 = mplay32.exe (Retro version of Media Player, very basic).
10) ODBC Data Source Administrator = odbcad32.exe (something to do with databases)
11) Object Packager = packager.exe (to do with packaging objects for insertion in files, appears to have comprehensive help files).
12) System Monitor = perfmon.exe (very useful, highly configurable tool, tells you everything you ever wanted to know about any aspect of PC performance, for uber-geeks only )
13) Program Manager = progman.exe (Legacy Windows 3.x desktop shell).
14) Remote Access phone book = rasphone.exe (documentation is virtually non-existant).
15) Registry Editor = regedt32.exe [also regedit.exe] (for hacking the Windows Registry).
16) Network shared folder wizard = shrpubw.exe (creates shared folders on network).
17) File siganture verification tool = sigverif.exe
18) Volume Contro = sndvol32.exe (I've included this for those people that lose it from the System Notification area).
19) System Configuration Editor = sysedit.exe (modify System.ini & Win.ini just like in Win98! ).
20) Syskey = syskey.exe (Secures XP Account database - use with care, it's virtually undocumented but it appears to encrypt all passwords, I'm not sure of the full implications).
21) Microsoft Telnet Client = telnet.exe
22) Driver Verifier Manager = verifier.exe (seems to be a utility for monitoring the actions of drivers, might be useful for people having driver problems. Undocumented).
23) Windows for Workgroups Chat = winchat.exe (appears to be an old NT utility to allow chat sessions over a LAN, help files available).
24) System configuration = msconfig.exe (can use to control starup programs)
25) gpedit.msc used to manage group policies, and permissions
To run any of these apps go to Start > Run and type the executable name (ie charmap).
WINDOWS XP HIDDEN APPS:
=========================================
1) Character Map = charmap.exe (very useful for finding unusual characters)
2) Disk Cleanup = cleanmgr.exe
3) Clipboard Viewer = clipbrd.exe (views contents of Windows clipboard)
4) Dr Watson = drwtsn32.exe (Troubleshooting tool)
5) DirectX diagnosis = dxdiag.exe (Diagnose & test DirectX, video & sound cards)
6) Private character editor = eudcedit.exe (allows creation or modification of characters)
7) IExpress Wizard = iexpress.exe (Create self-extracting / self-installing package)
8) Microsoft Synchronization Manager = mobsync.exe (appears to allow synchronization of files on the network for when working offline. Apparently undocumented).
9) Windows Media Player 5.1 = mplay32.exe (Retro version of Media Player, very basic).
10) ODBC Data Source Administrator = odbcad32.exe (something to do with databases)
11) Object Packager = packager.exe (to do with packaging objects for insertion in files, appears to have comprehensive help files).
12) System Monitor = perfmon.exe (very useful, highly configurable tool, tells you everything you ever wanted to know about any aspect of PC performance, for uber-geeks only )
13) Program Manager = progman.exe (Legacy Windows 3.x desktop shell).
14) Remote Access phone book = rasphone.exe (documentation is virtually non-existant).
15) Registry Editor = regedt32.exe [also regedit.exe] (for hacking the Windows Registry).
16) Network shared folder wizard = shrpubw.exe (creates shared folders on network).
17) File siganture verification tool = sigverif.exe
18) Volume Contro = sndvol32.exe (I've included this for those people that lose it from the System Notification area).
19) System Configuration Editor = sysedit.exe (modify System.ini & Win.ini just like in Win98! ).
20) Syskey = syskey.exe (Secures XP Account database - use with care, it's virtually undocumented but it appears to encrypt all passwords, I'm not sure of the full implications).
21) Microsoft Telnet Client = telnet.exe
22) Driver Verifier Manager = verifier.exe (seems to be a utility for monitoring the actions of drivers, might be useful for people having driver problems. Undocumented).
23) Windows for Workgroups Chat = winchat.exe (appears to be an old NT utility to allow chat sessions over a LAN, help files available).
24) System configuration = msconfig.exe (can use to control starup programs)
25) gpedit.msc used to manage group policies, and permissions
Speed Up Your, Speed Up Your Network and Internet Access
Windows Xp: Speed Up Your, Speed Up Your Network and Internet Access
I have a dial up connection and it improve my speeds about 25% in surfing the internet. give it a try. Im IT , only do it if you feel comfortable with changing registry.
Increasing network browsing speed
Does your computer slow down when you browse your local area network and connect to other computers that are sharing data? One of the most common causes of this slowdown is a feature of Windows Explorer that looks for scheduled tasks on remote computers. This effort can take some time on some computers and can really slow down your browsing. The window with which you are browsing the network may appear to freeze momentarily, as the system is waiting for a response from the remote computer.
Windows XP: Speeding Disk Access
Although this problem is a complex one, the solution is very simple. Instead of having to wait for the remote scheduled tasks, which is useless information to anyone who is not a system administrator remotely configuring scheduled tasks, you can disable this feature.
In order to do this, you will have to change the System Registry and delete a reference to a key so that this feature will not be loaded. To do this, follow these steps:
1. Open up the Registry Editor by clicking the Start Menu and selecting Run. Then type regedit in the text box and click the OK button.
2. Once the Registry Editor has loaded, expand the HKEY_LOCAL_MACHINE key.
3. Next, expand Software and then Microsoft.
4. Locate Windows and expand that as well.
5. You will want to be editing the main system files, so expand CurrentVersion.
6. Because this feature is a feature of the Windows component known as Explorer, expand the Explorer key.
7. Next, you will want to modify the remote computer settings, so expand the RemoteComputer key and then expand the NameSpace key to show all of the features that are enabled when you browse to a remote computer.
8. In the NameSpace folder you will find two entries. One is "{2227A280-3AEA-1069-A2DE-08002B30309D}" which tells Explorer to show printers shared on the remote machine. The other, "{D6277990-4C6A-11CF-8D87-00AA0060F5BF}," tells Explorer to show remote scheduled tasks. This is the one that you should delete. This can be done by right-clicking the name of the key and selecting Delete.
Tip:
If you have no use for viewing remote shared printers and are really only interested in shared files, consider deleting the printers key, "{2227A280-3AEA-1069-A2DE-08002B30309D}", as well. This will also boost your browsing speed.
Once you have deleted the key, you just need to restart and the changes will be in effect. Now your network computer browsing will be without needless delays.
I have a dial up connection and it improve my speeds about 25% in surfing the internet. give it a try. Im IT , only do it if you feel comfortable with changing registry.
Increasing network browsing speed
Does your computer slow down when you browse your local area network and connect to other computers that are sharing data? One of the most common causes of this slowdown is a feature of Windows Explorer that looks for scheduled tasks on remote computers. This effort can take some time on some computers and can really slow down your browsing. The window with which you are browsing the network may appear to freeze momentarily, as the system is waiting for a response from the remote computer.
Windows XP: Speeding Disk Access
Although this problem is a complex one, the solution is very simple. Instead of having to wait for the remote scheduled tasks, which is useless information to anyone who is not a system administrator remotely configuring scheduled tasks, you can disable this feature.
In order to do this, you will have to change the System Registry and delete a reference to a key so that this feature will not be loaded. To do this, follow these steps:
1. Open up the Registry Editor by clicking the Start Menu and selecting Run. Then type regedit in the text box and click the OK button.
2. Once the Registry Editor has loaded, expand the HKEY_LOCAL_MACHINE key.
3. Next, expand Software and then Microsoft.
4. Locate Windows and expand that as well.
5. You will want to be editing the main system files, so expand CurrentVersion.
6. Because this feature is a feature of the Windows component known as Explorer, expand the Explorer key.
7. Next, you will want to modify the remote computer settings, so expand the RemoteComputer key and then expand the NameSpace key to show all of the features that are enabled when you browse to a remote computer.
8. In the NameSpace folder you will find two entries. One is "{2227A280-3AEA-1069-A2DE-08002B30309D}" which tells Explorer to show printers shared on the remote machine. The other, "{D6277990-4C6A-11CF-8D87-00AA0060F5BF}," tells Explorer to show remote scheduled tasks. This is the one that you should delete. This can be done by right-clicking the name of the key and selecting Delete.
Tip:
If you have no use for viewing remote shared printers and are really only interested in shared files, consider deleting the printers key, "{2227A280-3AEA-1069-A2DE-08002B30309D}", as well. This will also boost your browsing speed.
Once you have deleted the key, you just need to restart and the changes will be in effect. Now your network computer browsing will be without needless delays.
Google for searching ebooks
Using Google for searching ebooks
Google has some fantastic potential for you to find whatever you are after on the internet.
To search for a book / program / file perhaps try the following.
Go to Google's search page and use the following criteria in the search dialog
intitle:index.of? file extension Name of item
e.g. intitle:index.of? chm syngress
This will hopefully give you a listing of all websites that google has cached that contain references to files in CHM format that are published by SYNGRESS.
---------------
I use in Google
+("index of") +("/ebooks"|"/book") +(chm|pdf|zip|rar) +syngress
or
allinurl: +(rar|chm|zip|pdf|tgz) Syngress
Enjoy
Google has some fantastic potential for you to find whatever you are after on the internet.
To search for a book / program / file perhaps try the following.
Go to Google's search page and use the following criteria in the search dialog
intitle:index.of? file extension Name of item
e.g. intitle:index.of? chm syngress
This will hopefully give you a listing of all websites that google has cached that contain references to files in CHM format that are published by SYNGRESS.
---------------
I use in Google
+("index of") +("/ebooks"|"/book") +(chm|pdf|zip|rar) +syngress
or
allinurl: +(rar|chm|zip|pdf|tgz) Syngress
Enjoy
Untold Secrete Windows Tips
As found in the internet, written by Ankit Fadia
Important Note: Before you read on, you need to keep one thing in mind. Whenever you make changes to the Windows Registry you need to Refresh it before the changes take place. Simply press F5 to refresh the registry and enable the changes. If this does not work Restart your system
****************
Exiting Windows the Cool and Quick Way
Normally it takes a hell lot of time just Shutting down Windows, you have to move your mouse to the Start Button, click on it, move it again over Shut Down, click, then move it over the necessary option and click, then move the cursor over the OK button and once again (you guessed it) click.This whole process can be shortened by creating shortcuts on the Desktop which will shut down Windows at the click of a button. Start by creating a new shortcut( right click and select New> Shortcut). Then in the command line box, type (without the quotes.)
'C:windowsrundll.exe user.exe,exitwindowsexec'
This Shortcut on clicking will restart Windows immediately without any Warning. To create a Shortcut to Restarting Windows, type the following in the Command Line box:
'c:windowsrundll.exe user.exe,exitwindows'
This Shortcut on clicking will shut down Windows immediately without any Warning.
Ban Shutdowns : A trick to Play on Lamers
This is a neat trick you can play on that lamer that has a huge ego, in this section I teach you, how to disable the Shut Down option in the Shut Down Dialog Box. This trick involves editing the registry, so please make backups. Launch regedit.exe and go to :
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane look for the NoClose Key. If it is not already there then create it by right clicking in the right pane and selecting New > String Value.(Name it NoCloseKey ) Now once you see the NoCloseKey in the right pane, right click on it and select Modify. Then Type 1 in the Value Data Box.
Doing the above on a Win98 system disables the Shut Down option in the Shut Down Dialog Box. But on a Win95 machine if the value of NoCloseKey is set to 1 then click on the Start > Shut Down button displays the following error message:
This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
You can enable the shut down option by changing the value of NoCloseKey to 0 or simply deleting the particular entry i.e. deleting NoCloseKey.
Instead of performing the above difficult to remember process, simply save the following with an extension of .reg and add it's contents to the registry by double clicking on it.
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoClose"="1"
Disabling Display of Drives in My Computer
This is yet another trick you can play on your geek friend. To disable the display of local or networked drives when you click My Computer go to :
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Now in the right pane create a new DWORD item and name it NoDrives. Now modify it's value and set it to 3FFFFFF (Hexadecimal) Now press F5 to refresh. When you click on My Computer, no drives will be shown. To enable display of drives in My Computer, simply delete this DWORD item. It's .reg file is as follows:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoDrives"=dword:03ffffff
Take Over the Screen Saver
To activate and deactivate the screen saver whenever you want, goto the following registry key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionScreenSavers
Now add a new string value and name it Mouse Corners. Edit this new value to -Y-N. Press F5 to refresh the registry. Voila! Now you can activate your screensaver by simply placing the mouse cursor at the top right corner of the screen and if you take the mouse to the bottom left corner of the screen, the screensaver will deactivate.
Pop a banner each time Windows Boots
To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWinLogon
Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it: LegalNoticeText. Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box. It's .reg file would be:
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWinlogon]
"LegalNoticeCaption"="Caption here."
Delete the Tips of the Day to save 5KB
Windows 95 had these tips of the day which appeared on a system running a newly installed Windows OS. These tips of the day are stored in the Windows Registry and consume 5K of space. For those of you who are really concerned about how much free space your hard disk has, I have the perfect trick.
To save 5K go to the following key in Regedit:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerTips
Now simply delete these tricks by selecting and pressing the DEL key.
Change the Default Locations
To change the default drive or path where Windows will look for it's installation files, go to the key:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionSetupSourcePath
Now you can edit as you wish.
Secure your Desktop Icons and Settings
You can save your desktop settings and secure it from your nerdy friend by playing with the registry. Simply launch the Registry Editor go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane create a new DWORD Value named NoSaveSettings and modify it's value to 1. Refresh and restart for the settings to get saved.
CLSID Folders Explained
Don't you just hate those stubborn stupid icons that refuse to leave the desktop, like the Network Neighborhood icon. I am sure you want to know how you can delete them. You may say, that is really simple, simply right click on the concerned icon and select Delete. Well not exactly, you see when you right click on these special folders( see entire list below)neither the rename nor the delete option does not appear. To delete these folders, there are two methods, the first one is using the System Policy Editor(Poledit in the Windows installation CD)and the second is using the Registry.
Before we go on, you need to understand what CLSID values are. These folders, like the Control Panel, Inbox, The Microsoft Network, Dial Up Networking etc are system folders. Each system folder has a unique CLSID key or the Class ID which is a 16-byte value which identifies an individual object that points to a corresponding key in the registry.
To delete these system Folders from the desktop simply go to the following registry key:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerDesktopNamespace
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
To delete an icon simply delete the 16 byte CLSID value within "NameSpace". The following are the CLSID values of the most commonly used icons:
My Briefcase:{85BBD920-42AO-1069-A2E4-08002B30309D}
Desktop: {00021400-0000-0000-C000-0000000000046}
Control Panel:{21EC2020-3AEA-1069-A2DD-08002B30309D}
Dial-Up-Networking:{992CFFA0-F557-101A-88EC-00DD01CCC48}
Fonts: {BD84B380-8CA2-1069-AB1D-08000948534}
Inbox :{00020D76-0000-0000-C000-000000000046}
My Computer :{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Network Neighborhood:{208D2C60-3AEA-1069-A2D7-O8002B30309D}
Printers :{2227A280-3AEA-1069-A2DE-O8002B30309D}
Recycle Bin :{645FF040-5081-101B-9F08-00AA002F954E}
The Microsoft Network:{00028B00-0000-0000-C000-000000000046}
History: {FF393560-C2A7-11CF-BFF4-444553540000}
Winzip :{E0D79300-84BE-11CE-9641-444553540000}
For example, to delete the Recycle Bin, first note down it's CLSID value, which is: 645FF040-5081-101B-9F08-00AA002F954E. Now go to the Namespace key in the registry and delete the corresponding key.
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerDesktopNameSpace
{645FF040-5081-101B-9F08-00AA002F954E}
Similarly to delete the History folder, delete the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerDesktopNameSpace
{FBF23B42-E3F0-101B-8488-00AA003E56F8}
Sometimes, you may need to play a trick on your brother or friend, well this one teaches you how to hide all icons from the Desktop. Go to the following registry key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane create a new DWORD value by the name: NoDesktop and set its value to: 1. Reboot and you will find no icons on the desktop.
Till now you simply learnt how to delete the special system folders by deleting a registry key, but the hack would have been better if there was a way of adding the DELETE and RENAME option to the right click context menus of these special folders. You can actually change the right click context menu of any system folder and add any of the following options: RENAME, DELETE, CUT, COPY, PASTE and lots more.
This hack too requires you to know the CLSID value of the system folder whose menu you want to customize. In this section, I have taken up Recycle Bin as the folder whose context menu I am going to edit.
Firstly launch the registry editor and open the following registry key:
HKEY_CLASSES_ROOTCLSID{645FF040-5081-101B-9F08-00AA002F954E}ShellFolder.
In Case you want to edit some other folder like say the FONTS folder, then you will open the following key:
HKEY_CLASSES_ROOTCLSID{CLSID VALUE HERE}ShellFolder.
In the right pane there will be a DWORD value names attributes. Now consider the following options:
To add the Rename option to the menu, change the value of Attributes to
50 01 00 20
To add the Delete option to the menu, change the value of Attributes to
60 01 00 20
3. To add both the Rename & Delete options to the menu, change the value of Attributes to 70,01,00,20
4. Add Copy to the menu, change Attributes to 41 01 00 20
5. Add Cut to the menu, change Attributes to 42 01 00 20
6. Add Copy & Cut to the menu, change Attributes to 43 01 00 20
7. Add Paste to the menu, change Attributes to 44 01 00 20
8. Add Copy & Paste to the menu, change Attributes to 45 01 00 20
9. Add Cut & Paste to the menu, change Attributes to 46 01 00 20
10.Add all Cut, Copy & Paste to the menu, change Attributes to 47 01 00 20
We want to add only the Rename option to the right click context menu of the Recycle Bin, so change the value of attributes to: 50 01 00 20. Press F5 to refresh and then after rebooting you will find that when you right click on the Recycle Bin a RENAME option pops up too.
To reset the default Windows options change the value of Attributes back to
40 01 00 20
The Registry File which one can create for the above process would be something like the below:
REGEDIT4
[HKEY_CLASSES_ROOTCLSID{645FF040-5081-101B-9F08-00AA002F954E}Shell-Folder]
"Attributes"=hex:50,01,00,20
To access say the Modem Properties in the Control Panel Folder, the normal procedure is: Click on Start, Click on Settings> Control Panel and then wait for the Control Panel window to pop up and then ultimately click on the Modems icon.
Wouldn't it be lovely if you could shorten the process to: Click on Start> Control Panel>Modems. Yes you can add the Control Panel and also all other Special System Folders directly to the first level Start Menu. Firstly collect the CLSID value of the folder you want to add to the start menu. I want to add Control Panel hence the CLSID value is: 21EC2020-3AEA-1069-A2DD-08002B30309D
Now right click on the Start Button and select Open. Now create a new folder and name it: Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}
NOTE: Do not forget the period after the 'l' in Panel. Similarly all system folders can be added to the Start Menu.(accept My Briefcase, I think)
Deleting System Options from the Start menu
You can actually remove the Find and Run options from the start menu by performing a simple registry hack. Again like always Launch the registry editor and scroll down to the below key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Right-click on the right pane and select New, DWORD Value. Name it NoFind.(To remove the RUN option name it NoRun). Double-click the newly create DWORD to edit it's value and enter 1 as its value. This will disable the FIND option of the Start Menu and will also disable the default Shortcut key(F3 for Find.)
To restore the Run or find command modify the value of the DWORD to 0 or simply Delete the DWORD value.
Fed Up of the boring Old Yellow Folder Icons?[Drive Icons Included]
NOTE: This trick hasn't been tried on Win98.
You can easily change the boring yellow folder icons to your own personalized icons. Simply create a text file and copy the following lines into it:
[.ShellClassInfo]
ICONFILE=Drive:PathIcon_name.extension
Save this text file by the name, desktop.ini in the folder, whose icon you want to change. Now to prevent this file from getting deleted change it's attributes to Hidden and Read Only by using the ATTRIB command.
To change the icon of a drive, create a text file containing the following lines:
[Autorun]
ICON=Drive:PathIcon_name.extension
Save this file in the root of the drive whose icon you want to change and name it autorun.inf For Example, if you want to change the icon of a floppy, SAVE THE icon in a:icon_name.ico One can also create a kewl icon for the Hard Disk and create a text file [autorun.inf] and store it in "c:".
Securing NT
By default, NT 4.0 displays the last person who logged onto the system. This can be considered to be a security threat, especially in the case of those who choose their password to be same as their Username. To disable this bug which actually is a feature, go to the following key in the registry editor:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsNTCurrentVersionWinlogon
Click and select the ReportBookOK item and create a new string value called DontDisplayLastUserName. Modify it and set it's value to 1.
As a system administrator, you can ensure that the passwords chosen by the users are not too lame or too easy to guess. NT has this lovely utility called the User Manager which allows the administrator to set the age limit of the password which forces the users to change the password after a certain number of days. You can also set the minimum length of passwords and prevent users to use passwords which already have been used earlier and also enable account lockouts which will deactivate an account after a specified number of failed login attempts.
When you log on to Win NT, you should disable Password Caching, this ensures Single NT Domain login and also prevents secondary Windows Logon screen.
Simply copy the following lines to a plain text ASCII editor like: Notepad and save it with an extension, .reg
----------------DISABLE.reg-----------------
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesNetwork]
"DisablePwdCaching"=dword:00000001
----------------DISABLE.reg-----------------
To Enable Password Caching use the following .reg file:
--------------Enable.reg-----------------
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesNetwork]
"DisablePwdCaching"=dword:00000000
--------------Enable.reg-----------------
Cleaning Recent Docs Menu and the RUN MRU
The Recent Docs menu can be easily disabled by editing the Registry. To do this go to the following Key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Now in the right pane, create a new DWORD value by the name: NoRecentDocsMenu and set it's value to 1. Restart Explorer to save the changes.
You can also clear the RUN MRU history. All the listings are stored in the key:
HKEY_USERS.DefaultSoftwareMicrosoftWindowsCurrentVersionExplorerRunMRU
You can delete individual listings or the entire listing. To delete History of Find listings go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerDoc Find Spec MRU
and delete.
Customizing the Right Click Context Menu of the Start Menu
When you right click on the start menu, only 3 options pop up: Open, Explore, and Find. You can add your own programs to this pop up menu( which comes up when we right click on it.) Open Regedit and go to the following registry key:
HKEY_CLASSES_ROOTDirectoryShell
Right click on the shell and create a new Sub Key (You can create a new SubKey by right clicking on the Shell Key and selecting New > Key.). Type in the name of the application you want to add to the start menu. I want to add Notepad to the Start Menu and hence I name this new sub key, Notepad. Now right click on the new registry key that you just created and create yet another new key named Command. Enter the full path of the application, in this case Notepad in the default value of Command in the right
pane. So I Modify the value of the default string value and enter the full pathname of Notepad:
c:wndowsnotepad.exe.
Now press F5 to refresh. Now if you right click on the Start Button you will find a new addition to the Pop Up Menu called Notepad. Clicking on it will launch Notepad.
We can not only add but also remove the existing options in this pop up box.
To delete the Find option, go to the following registry key:
HKEY_CLASSES_ROOTDirectoryShellFind
Delete Find. DO NOT delete Open else you will not be able to open any folders in the Start Menu like Programs, Accessories etc.
BMP Thumbnail As Icon
You can actually change the default BMP icon to a thumbnail version of the actual BMP file. To do this simply go to HKCUPaint.PictureDefault. In the right pane change the value of default to %1. Please note however that this will slow down the display rate in explorer if there are too many BMP thumbnails to display. You can use other icons too, simply enter the pathname.To restore back to the normal change the vale of default back to: C:Progra~1Access~1MSPAINT.EXE,1.
Customizing The Shortcut Arrow
All shortcuts have a tiny black arrow attached to it's icon to distinguish from normal files. This arrow can sometimes be pretty annoying and as a Hacker should know how to change each and everything, here goes another trick. Launch the Registry Editor and go to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerShell Icons.
Now, on the right pane is a list of icons ( we found out that on some systems, Windows 98 especially, the right pane is blank. Don't worry, just add the value as required ). Find the value 29. If it isn't there, just add it. The value of this string should be C:Windowssystemshell32.dll, 29 ( which means the 30th icon in shell32.dll - the first one begins with 0 ). Now, we need blank icon to do this. Just create one with white as the whole icon. Go here to learn how to create an icon. Once done just change the value to C:xxx.ico, 0 where "xxx" is the full path of the icon file and "0" is the icon in it.
Now for some fun. If the blank icon is a bit boring, change it again. You will find that under shell32.dll there is a gear icon, a shared folder ( the hand ) and much more. Experiment for yourself!
Use Perl to Get List or Services Running on your NT box
Use the following Perl Script to get a list of Services running on your NT system
--------------script.pl-----------------
#!c:perbinperl.exe
use Win32::Service;
my ($key, %service, %status, $part);
Win32::Service::GetServices(' ',%services);
foreach $key (sort keys %services) {
print "Print Namet: $key, $services{$key}n";
Win32::Service::GetStatus( ' ',$services{$key};
%status);
foreach $part (keys %status) {
print "t$part : $status{$part}n" if($part eq "CurrentState");
}
}
-------------script.pl-------------------
Internet Explorer Tricks and Tips
Resizable Full Screen Toolbar
The Full Screen option increases the viewable area and makes surfing more enjoyable but sometimes we need the Toolbar but also need to have extra viewing area. Now this hack teaches you how to change the size of the Internet Explorer toolbar. This registry hack is a bit complicated as it involves Binary values, so to make it simple, I have included the following registry file which will enable the resizable option of the Internet Explorer toolbar which was present in the beta version of IE.
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerToolbar]
"Theater"=hex:0c,00,00,00,4c,00,00,00,74,00,00,00,18,00,00,00,1b,00,00,00,5c,
00,00,00,01,00,00,00,e0,00,00,00,a0,0f,00,00,05,00,00,00,22,00,00,00,26,00,
00,00,02,00,00,00,21,00,00,00,a0,0f,00,00,04,00,00,00,01,00,00,00,a0,0f,00,
00,03,00,00,00,08,00,00,00,00,00,00,00
*******************
HACKING TRUTH: Internet Explorer 5 displays the friendly version of HTTP errors like NOT FOUND etc . They are aimed at making things easier for newbies. If you would rather prefer to see the proper error pages for the web server you're using, go to Tools, Internet Options and select the Advanced tab. Then scroll down and uncheck the Show friendly http errors box.
*******************
Making the Internet Explorer & the Explorer Toolbars Fancy
The Internet Explorer toolbar looks pretty simple. Want to make it fancy and kewl? Why not add a background image to it. To do this kewl hack launch the Windows Registry Editor and go to the following key: HKEY_CURRENT_USERSOFTWAREMicrosoft Internet ExplorerToolbar.
Now in the right pane create a new String Value and name it BackBitmap and modify it's value to the path of the Bitmap you want to dress it up with by rightclicking on it and choosing Modify. When you reboot the Internet Explorer and the Windows Explorer toolbars will have a new look.
Change Internet Explorer's Caption
Don't like the caption of Internet Explorer caption? Want to change it? Open the registry editor and go to
HKEY_LOCAL_MACHINESOFTWAREMicrosoftInternet ExplorerMain.
In the right pane create a new String Value names Window Title (Note the space between Window and Title). Right click on this newly created String Value and select Modify. Type in the new caption you want to be displayed. Restart for the settings to take place.
Now let's move on to some Outlook Express Tricks.
Colorful Background
Don't like the boring background colors of Outlook Express? To change it launch the Windows Registry Editor and scroll down to the
HKEY_CURRENT_USERSoftwareMicrosoftInternet Mail And News key.
On the left pane, click on ColorCycle or select Edit and Modify in the menu. Now change the value to 1. Close and restart. Now, launch Outlook Express and whenever you open up a New Message, hold down ctrl-shift and tap the z key to scroll to change the background color. Repeat the keystroke to cycle through the colors.
Internet Explorer 5 Hidden Features
Microsoft Internet Explorer 5 has several hidden features which can be controlled using the Windows Registry. Open your registry and scroll down to the following key:
HKEY_CURRENT_USERSoftwarePoliciesMicrosoftInternet ExplorerRestrictions
Create a new DWORD value named x(See complete list of values of x below) and modify it's value to 1 to enable it and to 0 to disable it.
NoBrowserClose : Disable the option of closing Internet Explorer.
NoBrowserContextMenu : Disable right-click context menu.
NoBrowserOptions : Disable the Tools / Internet Options menu.
NoBrowserSaveAs : Disable the ability to Save As.
NoFavorites : Disable the Favorites.
NoFileNew : Disable the File / New command.
NoFileOpen : Disable the File / Open command.
NoFindFiles : Disable the Find Files command.
NoSelectDownloadDir : Disable the option of selecting a download directory.
NoTheaterMode : Disable the Full Screen view option.
Hacking Secrets
Almost all system administrators make certain changes and make the system restricted. System Administrators can hide the RUN option, the FIND command, the entire Control Panel, drives in My Computer like D: A: etc. They can even restrict activities of a hacker my disabling or hiding, even the tiniest options or tools.
Most commonly these restrictions are imposed locally and are controlled by the Windows Registry. But sometimes the smart system administrators control the activities of the hacker by imposing restrictions remotely through the main server.
Poledit or Policy Editor is a small kewl tool which is being commonly used by system administrators to alter the settings of a system. This utility is not installed by default by Windows. You need to install in manually from the Windows 98 Installation Kit from the Resource Kit folder. user.dat file that we saw earlier.
The Policy Editor tool imposes restrictions on the user's system by editing the user.dat file which in turn means that it edits the Windows Registry to change the settings. It can be used to control or restrict access to each and every folder and option you could ever think of. It has the power to even restrict access to individual folders, files, the Control Panel, MS DOS, the drives available etc. Sometimes this software does make life really hard for a Hacker. So how can we remove the restrictions imposed by the Policy Editor? Well read ahead to learn more.
You see the Policy Editor is not the only way to restrict a user's activities. As we already know that the Policy Editor edits the Windows Registry(user.dat) file to impose such restrictions. So this in turn would mean that we can directly make changes to the Windows Registry using a .reg file or directly to remove or add restrictions.
Launch Regedit and go to the following Registry Key:
HKEY_CURRENT_USER/Software/Microsoft/CurrentVersion/Policies
Under this key, there will definitely be a key named explorer. Now under this explorer key we can create new DWORD values and modify it's value to 1 in order to impose the restriction. If you want to remove the Restriction, then you can simply delete the respective DWORD values or instead change their values to 0. The following is a list of DWORD values that can be created under the Explorer Key-:
NoDeletePrinter: Disables Deletion of already installed Printers
NoAddPrinter: Disables Addition of new Printers
NoRun : Disables or hides the Run Command
NoSetFolders: Removes Folders from the Settings option on Start Menu (Control Panel, Printers, Taskbar)
NoSetTaskbar: Removes Taskbar system folder from the Settings option on Start Menu
NoFind: Removes the Find Tool (Start >Find)
NoDrives: Hides and does not display any Drives in My Computer
NoNetHood: Hides or removes the Network Neighborhood icon from the desktop
NoDesktop: Hides all items including, file, folders and system folders from the Desktop
NoClose: Disables Shutdown and prevents the user from normally shutting down Windows.
NoSaveSettings: Means to say, 'Don't save settings on exit'
DisableRegistryTools: Disable Registry Editing Tools (If you disable this option, the Windows Registry Editor(regedit.exe) too
will not work.)
NoRecentDocsHistory: Removes Recent Document system folder from the Start Menu (IE 4 and above)
ClearRecentDocsOnExit: Clears the Recent Documents system folder on Exit.
Nolnternetlcon: Removes the Internet (system folder) icon from the Desktop
Under the same key: HKEY_CURRENT_USER/Software/Microsoft/CurrentVersion/Policies you can create new subkeys other than the already existing Explorer key. Now create a new key and name it System. Under this new key, system we can create the following new DWORD values(1 for enabling the particular option and 0 for disabling the particular option):
NODispCPL: Hides Control Panel
NoDispBackgroundPage: Hides Background page.
NoDispScrsavPage: Hides Screen Saver Page
NoDispAppearancePage: Hides Appearance Page
NoDispSettingsPage: Hides Settings Page
NoSecCPL: Disables Password Control Panel
NoPwdPage: Hides Password Change Page
NoAdminPaqe: Hides Remote Administration Page
NoProfilePage: Hides User Profiles Page
NoDevMgrPage: Hides Device Manager Page
NoConfigPage: Hides Hardware Profiles Page
NoFileSysPage: Hides File System Button
NoVirtMemPage: Hides Virtual Memory Button
Similarly, if we create a new subkey named Network, we can add the following DWORD values under it(1 for enabling the particular option and 0 for disabling the particular option):
NoNetSetupSecurityPage: Hides Network Security Page
NoNelSetup: Hides or disables the Network option in the Control Panel
NoNetSetupIDPage: Hides the Identification Page
NoNetSetupSecurityPage: Hides the Access Control Page
NoFileSharingControl: Disables File Sharing Controls
NoPrintSharing: Disables Print Sharing Controls
Similarly, if we create a new subkey named WinOldApp, we can add the following DWORD values under it(1 for enabling the particular option and 0 for disabling the particular option):
Disabled: Disable MS-DOS Prompt
NoRealMode: Disable Single-Mode MS-DOS.
So you see if you have access to the Windows Registry, then you can easily create new DWORD values and set heir value to 1 for enabling the particular option and 0 for disabling the particular option. But Sometimes, access to the Windows Registry is blocked. So what do you do? Go to the Windows Directory and delete either user.dat or system.dat (These 2 files constitute the Windows Registry.) and reboot. As soon as Windows logs in, it will display a Warning Message informing you about an error in the Windows Registry. Simply ignore this Warning Message and Press CTRL+DEL+ALT to get out of this warning message.(Do not press OK) You will find that all restrictions have been removed.
The most kind of restriction found quite commonly is the Specific Folder Restriction, in which users are not allowed access to specific folders, the most common being the Windows folder, or sometimes even access to My Computer is blocked. In effect, you simply cannot seem to access the important kewl files which are needed by you to do remove restrictions. What do you? Well use the RUN command. (START >RUN). But unfortunately a system administrator who is intelligent enough to block access to specific folder, would definitely have blocked access to the RUN command. Again we are stuck.
Windows is supposed to be the most User Friendly Operating System on earth. (At least Microsoft Says so.)
It gives the User an option to do the same thing in various ways. You see the RUN command is only the most convenient option of launching applications, but not the only way. In Windows you can create shortcuts to almost anything from a file, folder to a Web URL. So say your system administrator has blocked access to the c:windowssystem folder and you need to access it. What do you do? Simply create a Shortcut to it. To do this right click anywhere on the desktop and select New > Shortcut. A new window titled Create Shortcut pops up. Type in the path of the restricted folder you wish to access, in this case c:windowssystem. Click Next, Enter the friendly name of the Shortcut and then click Finish. Now you can access the restricted folder by simply double clicking on the shortcut icon. Well that shows how protected and secure *ahem Windows *ahem is.
****************
HACKING TRUTH: Sometimes when you try to delete a file or a folder, Windows displays an error message saying that the file is protected. This simply means that the file is write protected, or in other words the R option is +. Get it? Anyway, you can stop Windows from displaying this error message and straightaway delete this file by changing its attributes to Non Read Only. This can be done by Right Clicking on the file, selecting Properties and then
unselecting the Read Only Option.
***************
There is yet another way of accessing restricted folders. Use see, DOS has a lovely command known as START. Its general syntax is:
START application_path
It does do what it seems to do, start applications. So in you have access to DOS then you can type in the START command to get access to the restricted folder. Now mostly access to DOS too would be blocked. So again you can use the shortcut trick to launch, c:command.com or c:windowscommand.com. (Command.com is the file which launches MS DOS).
Accessing Restricted Drives.
The problem with most system administrators is that they think that the users or Hackers too are stupid. Almost all system administrators use the Registry Trick (Explained Earlier) to hide all drives in My Computer. So in order to unhide or display all drives, simply delete that particular key.(Refer to beginning of Untold Secrets Section.)
Some systems have the floppy disk disabled through the BIOS. On those systems if the BIOS is protected, you may need to crack the BIOS password. (For that Refer to the Windows Hacking Chapter). Sometimes making drives readable (Removing R +) and then creating Shortcuts to them also helps us to get access to them.
Further Changing your Operating System's Looks by editing .htt files
If you have installed Windows Desktop Update and have the view as Web Page option enabled, you can customise the way the folder looks by selecting View > Customise this folder. Here you can change the background and other things about that particular folder. Well that is pretty lame, right? We hackers already know things as lame as that. Read on for some kewl stuff.
Well, you could also change the default that is stored in a Hidden HTML Template file (I think so..) which is nothing but a HTML document with a .htt extension. This .htt file is found at: %systemroot%webfolder.htt.
The %systemroot% stands for the drive in which Windows is Installed, which is normally C:
You can edit these .htt files almost just like you edit normal .HTM or .HTML files. Simply open them in an ASCII editor like Notepad. The following is a list of .htt files on your system which control various folders and which can be edited to customise the way various folders look.
controlp.htt Control Panel
printers.htt Printers
mycomp.htt My Computer
safemode.htt Safe Mode
All these files are found in the web folder in %systemfolder%. The folder.htt file has a line:
'Here's a good place to add a few lines of your own"
which is the place where you can add your own A HREF links. These links would then appear in the folder whose folder.htt file you edited. All this might sound really easy and simple, but you see these .htt files do not contain normal HTML code, instead they contain a mixture of HTML and web bots. Hence they can be difficult for newbies to understand.
Wow long txt, and yes it has been copied from other sites, you think I have time to write all this myself, I wish enjoy
User is offlineProfile CardPM
Report PostGo to the top of the page
+Quote Post
Important Note: Before you read on, you need to keep one thing in mind. Whenever you make changes to the Windows Registry you need to Refresh it before the changes take place. Simply press F5 to refresh the registry and enable the changes. If this does not work Restart your system
****************
Exiting Windows the Cool and Quick Way
Normally it takes a hell lot of time just Shutting down Windows, you have to move your mouse to the Start Button, click on it, move it again over Shut Down, click, then move it over the necessary option and click, then move the cursor over the OK button and once again (you guessed it) click.This whole process can be shortened by creating shortcuts on the Desktop which will shut down Windows at the click of a button. Start by creating a new shortcut( right click and select New> Shortcut). Then in the command line box, type (without the quotes.)
'C:windowsrundll.exe user.exe,exitwindowsexec'
This Shortcut on clicking will restart Windows immediately without any Warning. To create a Shortcut to Restarting Windows, type the following in the Command Line box:
'c:windowsrundll.exe user.exe,exitwindows'
This Shortcut on clicking will shut down Windows immediately without any Warning.
Ban Shutdowns : A trick to Play on Lamers
This is a neat trick you can play on that lamer that has a huge ego, in this section I teach you, how to disable the Shut Down option in the Shut Down Dialog Box. This trick involves editing the registry, so please make backups. Launch regedit.exe and go to :
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane look for the NoClose Key. If it is not already there then create it by right clicking in the right pane and selecting New > String Value.(Name it NoCloseKey ) Now once you see the NoCloseKey in the right pane, right click on it and select Modify. Then Type 1 in the Value Data Box.
Doing the above on a Win98 system disables the Shut Down option in the Shut Down Dialog Box. But on a Win95 machine if the value of NoCloseKey is set to 1 then click on the Start > Shut Down button displays the following error message:
This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
You can enable the shut down option by changing the value of NoCloseKey to 0 or simply deleting the particular entry i.e. deleting NoCloseKey.
Instead of performing the above difficult to remember process, simply save the following with an extension of .reg and add it's contents to the registry by double clicking on it.
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoClose"="1"
Disabling Display of Drives in My Computer
This is yet another trick you can play on your geek friend. To disable the display of local or networked drives when you click My Computer go to :
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Now in the right pane create a new DWORD item and name it NoDrives. Now modify it's value and set it to 3FFFFFF (Hexadecimal) Now press F5 to refresh. When you click on My Computer, no drives will be shown. To enable display of drives in My Computer, simply delete this DWORD item. It's .reg file is as follows:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoDrives"=dword:03ffffff
Take Over the Screen Saver
To activate and deactivate the screen saver whenever you want, goto the following registry key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionScreenSavers
Now add a new string value and name it Mouse Corners. Edit this new value to -Y-N. Press F5 to refresh the registry. Voila! Now you can activate your screensaver by simply placing the mouse cursor at the top right corner of the screen and if you take the mouse to the bottom left corner of the screen, the screensaver will deactivate.
Pop a banner each time Windows Boots
To pop a banner which can contain any message you want to display just before a user is going to log on, go to the key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWinLogon
Now create a new string Value in the right pane named LegalNoticeCaption and enter the value that you want to see in the Menu Bar. Now create yet another new string value and name it: LegalNoticeText. Modify it and insert the message you want to display each time Windows boots. This can be effectively used to display the company's private policy each time the user logs on to his NT box. It's .reg file would be:
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionWinlogon]
"LegalNoticeCaption"="Caption here."
Delete the Tips of the Day to save 5KB
Windows 95 had these tips of the day which appeared on a system running a newly installed Windows OS. These tips of the day are stored in the Windows Registry and consume 5K of space. For those of you who are really concerned about how much free space your hard disk has, I have the perfect trick.
To save 5K go to the following key in Regedit:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerTips
Now simply delete these tricks by selecting and pressing the DEL key.
Change the Default Locations
To change the default drive or path where Windows will look for it's installation files, go to the key:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionSetupSourcePath
Now you can edit as you wish.
Secure your Desktop Icons and Settings
You can save your desktop settings and secure it from your nerdy friend by playing with the registry. Simply launch the Registry Editor go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane create a new DWORD Value named NoSaveSettings and modify it's value to 1. Refresh and restart for the settings to get saved.
CLSID Folders Explained
Don't you just hate those stubborn stupid icons that refuse to leave the desktop, like the Network Neighborhood icon. I am sure you want to know how you can delete them. You may say, that is really simple, simply right click on the concerned icon and select Delete. Well not exactly, you see when you right click on these special folders( see entire list below)neither the rename nor the delete option does not appear. To delete these folders, there are two methods, the first one is using the System Policy Editor(Poledit in the Windows installation CD)and the second is using the Registry.
Before we go on, you need to understand what CLSID values are. These folders, like the Control Panel, Inbox, The Microsoft Network, Dial Up Networking etc are system folders. Each system folder has a unique CLSID key or the Class ID which is a 16-byte value which identifies an individual object that points to a corresponding key in the registry.
To delete these system Folders from the desktop simply go to the following registry key:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerDesktopNamespace
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
To delete an icon simply delete the 16 byte CLSID value within "NameSpace". The following are the CLSID values of the most commonly used icons:
My Briefcase:{85BBD920-42AO-1069-A2E4-08002B30309D}
Desktop: {00021400-0000-0000-C000-0000000000046}
Control Panel:{21EC2020-3AEA-1069-A2DD-08002B30309D}
Dial-Up-Networking:{992CFFA0-F557-101A-88EC-00DD01CCC48}
Fonts: {BD84B380-8CA2-1069-AB1D-08000948534}
Inbox :{00020D76-0000-0000-C000-000000000046}
My Computer :{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Network Neighborhood:{208D2C60-3AEA-1069-A2D7-O8002B30309D}
Printers :{2227A280-3AEA-1069-A2DE-O8002B30309D}
Recycle Bin :{645FF040-5081-101B-9F08-00AA002F954E}
The Microsoft Network:{00028B00-0000-0000-C000-000000000046}
History: {FF393560-C2A7-11CF-BFF4-444553540000}
Winzip :{E0D79300-84BE-11CE-9641-444553540000}
For example, to delete the Recycle Bin, first note down it's CLSID value, which is: 645FF040-5081-101B-9F08-00AA002F954E. Now go to the Namespace key in the registry and delete the corresponding key.
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerDesktopNameSpace
{645FF040-5081-101B-9F08-00AA002F954E}
Similarly to delete the History folder, delete the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerDesktopNameSpace
{FBF23B42-E3F0-101B-8488-00AA003E56F8}
Sometimes, you may need to play a trick on your brother or friend, well this one teaches you how to hide all icons from the Desktop. Go to the following registry key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
In the right pane create a new DWORD value by the name: NoDesktop and set its value to: 1. Reboot and you will find no icons on the desktop.
Till now you simply learnt how to delete the special system folders by deleting a registry key, but the hack would have been better if there was a way of adding the DELETE and RENAME option to the right click context menus of these special folders. You can actually change the right click context menu of any system folder and add any of the following options: RENAME, DELETE, CUT, COPY, PASTE and lots more.
This hack too requires you to know the CLSID value of the system folder whose menu you want to customize. In this section, I have taken up Recycle Bin as the folder whose context menu I am going to edit.
Firstly launch the registry editor and open the following registry key:
HKEY_CLASSES_ROOTCLSID{645FF040-5081-101B-9F08-00AA002F954E}ShellFolder.
In Case you want to edit some other folder like say the FONTS folder, then you will open the following key:
HKEY_CLASSES_ROOTCLSID{CLSID VALUE HERE}ShellFolder.
In the right pane there will be a DWORD value names attributes. Now consider the following options:
To add the Rename option to the menu, change the value of Attributes to
50 01 00 20
To add the Delete option to the menu, change the value of Attributes to
60 01 00 20
3. To add both the Rename & Delete options to the menu, change the value of Attributes to 70,01,00,20
4. Add Copy to the menu, change Attributes to 41 01 00 20
5. Add Cut to the menu, change Attributes to 42 01 00 20
6. Add Copy & Cut to the menu, change Attributes to 43 01 00 20
7. Add Paste to the menu, change Attributes to 44 01 00 20
8. Add Copy & Paste to the menu, change Attributes to 45 01 00 20
9. Add Cut & Paste to the menu, change Attributes to 46 01 00 20
10.Add all Cut, Copy & Paste to the menu, change Attributes to 47 01 00 20
We want to add only the Rename option to the right click context menu of the Recycle Bin, so change the value of attributes to: 50 01 00 20. Press F5 to refresh and then after rebooting you will find that when you right click on the Recycle Bin a RENAME option pops up too.
To reset the default Windows options change the value of Attributes back to
40 01 00 20
The Registry File which one can create for the above process would be something like the below:
REGEDIT4
[HKEY_CLASSES_ROOTCLSID{645FF040-5081-101B-9F08-00AA002F954E}Shell-Folder]
"Attributes"=hex:50,01,00,20
To access say the Modem Properties in the Control Panel Folder, the normal procedure is: Click on Start, Click on Settings> Control Panel and then wait for the Control Panel window to pop up and then ultimately click on the Modems icon.
Wouldn't it be lovely if you could shorten the process to: Click on Start> Control Panel>Modems. Yes you can add the Control Panel and also all other Special System Folders directly to the first level Start Menu. Firstly collect the CLSID value of the folder you want to add to the start menu. I want to add Control Panel hence the CLSID value is: 21EC2020-3AEA-1069-A2DD-08002B30309D
Now right click on the Start Button and select Open. Now create a new folder and name it: Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}
NOTE: Do not forget the period after the 'l' in Panel. Similarly all system folders can be added to the Start Menu.(accept My Briefcase, I think)
Deleting System Options from the Start menu
You can actually remove the Find and Run options from the start menu by performing a simple registry hack. Again like always Launch the registry editor and scroll down to the below key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Right-click on the right pane and select New, DWORD Value. Name it NoFind.(To remove the RUN option name it NoRun). Double-click the newly create DWORD to edit it's value and enter 1 as its value. This will disable the FIND option of the Start Menu and will also disable the default Shortcut key(F3 for Find.)
To restore the Run or find command modify the value of the DWORD to 0 or simply Delete the DWORD value.
Fed Up of the boring Old Yellow Folder Icons?[Drive Icons Included]
NOTE: This trick hasn't been tried on Win98.
You can easily change the boring yellow folder icons to your own personalized icons. Simply create a text file and copy the following lines into it:
[.ShellClassInfo]
ICONFILE=Drive:PathIcon_name.extension
Save this text file by the name, desktop.ini in the folder, whose icon you want to change. Now to prevent this file from getting deleted change it's attributes to Hidden and Read Only by using the ATTRIB command.
To change the icon of a drive, create a text file containing the following lines:
[Autorun]
ICON=Drive:PathIcon_name.extension
Save this file in the root of the drive whose icon you want to change and name it autorun.inf For Example, if you want to change the icon of a floppy, SAVE THE icon in a:icon_name.ico One can also create a kewl icon for the Hard Disk and create a text file [autorun.inf] and store it in "c:".
Securing NT
By default, NT 4.0 displays the last person who logged onto the system. This can be considered to be a security threat, especially in the case of those who choose their password to be same as their Username. To disable this bug which actually is a feature, go to the following key in the registry editor:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsNTCurrentVersionWinlogon
Click and select the ReportBookOK item and create a new string value called DontDisplayLastUserName. Modify it and set it's value to 1.
As a system administrator, you can ensure that the passwords chosen by the users are not too lame or too easy to guess. NT has this lovely utility called the User Manager which allows the administrator to set the age limit of the password which forces the users to change the password after a certain number of days. You can also set the minimum length of passwords and prevent users to use passwords which already have been used earlier and also enable account lockouts which will deactivate an account after a specified number of failed login attempts.
When you log on to Win NT, you should disable Password Caching, this ensures Single NT Domain login and also prevents secondary Windows Logon screen.
Simply copy the following lines to a plain text ASCII editor like: Notepad and save it with an extension, .reg
----------------DISABLE.reg-----------------
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesNetwork]
"DisablePwdCaching"=dword:00000001
----------------DISABLE.reg-----------------
To Enable Password Caching use the following .reg file:
--------------Enable.reg-----------------
REGEDIT4
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesNetwork]
"DisablePwdCaching"=dword:00000000
--------------Enable.reg-----------------
Cleaning Recent Docs Menu and the RUN MRU
The Recent Docs menu can be easily disabled by editing the Registry. To do this go to the following Key:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Now in the right pane, create a new DWORD value by the name: NoRecentDocsMenu and set it's value to 1. Restart Explorer to save the changes.
You can also clear the RUN MRU history. All the listings are stored in the key:
HKEY_USERS.DefaultSoftwareMicrosoftWindowsCurrentVersionExplorerRunMRU
You can delete individual listings or the entire listing. To delete History of Find listings go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerDoc Find Spec MRU
and delete.
Customizing the Right Click Context Menu of the Start Menu
When you right click on the start menu, only 3 options pop up: Open, Explore, and Find. You can add your own programs to this pop up menu( which comes up when we right click on it.) Open Regedit and go to the following registry key:
HKEY_CLASSES_ROOTDirectoryShell
Right click on the shell and create a new Sub Key (You can create a new SubKey by right clicking on the Shell Key and selecting New > Key.). Type in the name of the application you want to add to the start menu. I want to add Notepad to the Start Menu and hence I name this new sub key, Notepad. Now right click on the new registry key that you just created and create yet another new key named Command. Enter the full path of the application, in this case Notepad in the default value of Command in the right
pane. So I Modify the value of the default string value and enter the full pathname of Notepad:
c:wndowsnotepad.exe.
Now press F5 to refresh. Now if you right click on the Start Button you will find a new addition to the Pop Up Menu called Notepad. Clicking on it will launch Notepad.
We can not only add but also remove the existing options in this pop up box.
To delete the Find option, go to the following registry key:
HKEY_CLASSES_ROOTDirectoryShellFind
Delete Find. DO NOT delete Open else you will not be able to open any folders in the Start Menu like Programs, Accessories etc.
BMP Thumbnail As Icon
You can actually change the default BMP icon to a thumbnail version of the actual BMP file. To do this simply go to HKCUPaint.PictureDefault. In the right pane change the value of default to %1. Please note however that this will slow down the display rate in explorer if there are too many BMP thumbnails to display. You can use other icons too, simply enter the pathname.To restore back to the normal change the vale of default back to: C:Progra~1Access~1MSPAINT.EXE,1.
Customizing The Shortcut Arrow
All shortcuts have a tiny black arrow attached to it's icon to distinguish from normal files. This arrow can sometimes be pretty annoying and as a Hacker should know how to change each and everything, here goes another trick. Launch the Registry Editor and go to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionexplorerShell Icons.
Now, on the right pane is a list of icons ( we found out that on some systems, Windows 98 especially, the right pane is blank. Don't worry, just add the value as required ). Find the value 29. If it isn't there, just add it. The value of this string should be C:Windowssystemshell32.dll, 29 ( which means the 30th icon in shell32.dll - the first one begins with 0 ). Now, we need blank icon to do this. Just create one with white as the whole icon. Go here to learn how to create an icon. Once done just change the value to C:xxx.ico, 0 where "xxx" is the full path of the icon file and "0" is the icon in it.
Now for some fun. If the blank icon is a bit boring, change it again. You will find that under shell32.dll there is a gear icon, a shared folder ( the hand ) and much more. Experiment for yourself!
Use Perl to Get List or Services Running on your NT box
Use the following Perl Script to get a list of Services running on your NT system
--------------script.pl-----------------
#!c:perbinperl.exe
use Win32::Service;
my ($key, %service, %status, $part);
Win32::Service::GetServices(' ',%services);
foreach $key (sort keys %services) {
print "Print Namet: $key, $services{$key}n";
Win32::Service::GetStatus( ' ',$services{$key};
%status);
foreach $part (keys %status) {
print "t$part : $status{$part}n" if($part eq "CurrentState");
}
}
-------------script.pl-------------------
Internet Explorer Tricks and Tips
Resizable Full Screen Toolbar
The Full Screen option increases the viewable area and makes surfing more enjoyable but sometimes we need the Toolbar but also need to have extra viewing area. Now this hack teaches you how to change the size of the Internet Explorer toolbar. This registry hack is a bit complicated as it involves Binary values, so to make it simple, I have included the following registry file which will enable the resizable option of the Internet Explorer toolbar which was present in the beta version of IE.
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerToolbar]
"Theater"=hex:0c,00,00,00,4c,00,00,00,74,00,00,00,18,00,00,00,1b,00,00,00,5c,
00,00,00,01,00,00,00,e0,00,00,00,a0,0f,00,00,05,00,00,00,22,00,00,00,26,00,
00,00,02,00,00,00,21,00,00,00,a0,0f,00,00,04,00,00,00,01,00,00,00,a0,0f,00,
00,03,00,00,00,08,00,00,00,00,00,00,00
*******************
HACKING TRUTH: Internet Explorer 5 displays the friendly version of HTTP errors like NOT FOUND etc . They are aimed at making things easier for newbies. If you would rather prefer to see the proper error pages for the web server you're using, go to Tools, Internet Options and select the Advanced tab. Then scroll down and uncheck the Show friendly http errors box.
*******************
Making the Internet Explorer & the Explorer Toolbars Fancy
The Internet Explorer toolbar looks pretty simple. Want to make it fancy and kewl? Why not add a background image to it. To do this kewl hack launch the Windows Registry Editor and go to the following key: HKEY_CURRENT_USERSOFTWAREMicrosoft Internet ExplorerToolbar.
Now in the right pane create a new String Value and name it BackBitmap and modify it's value to the path of the Bitmap you want to dress it up with by rightclicking on it and choosing Modify. When you reboot the Internet Explorer and the Windows Explorer toolbars will have a new look.
Change Internet Explorer's Caption
Don't like the caption of Internet Explorer caption? Want to change it? Open the registry editor and go to
HKEY_LOCAL_MACHINESOFTWAREMicrosoftInternet ExplorerMain.
In the right pane create a new String Value names Window Title (Note the space between Window and Title). Right click on this newly created String Value and select Modify. Type in the new caption you want to be displayed. Restart for the settings to take place.
Now let's move on to some Outlook Express Tricks.
Colorful Background
Don't like the boring background colors of Outlook Express? To change it launch the Windows Registry Editor and scroll down to the
HKEY_CURRENT_USERSoftwareMicrosoftInternet Mail And News key.
On the left pane, click on ColorCycle or select Edit and Modify in the menu. Now change the value to 1. Close and restart. Now, launch Outlook Express and whenever you open up a New Message, hold down ctrl-shift and tap the z key to scroll to change the background color. Repeat the keystroke to cycle through the colors.
Internet Explorer 5 Hidden Features
Microsoft Internet Explorer 5 has several hidden features which can be controlled using the Windows Registry. Open your registry and scroll down to the following key:
HKEY_CURRENT_USERSoftwarePoliciesMicrosoftInternet ExplorerRestrictions
Create a new DWORD value named x(See complete list of values of x below) and modify it's value to 1 to enable it and to 0 to disable it.
NoBrowserClose : Disable the option of closing Internet Explorer.
NoBrowserContextMenu : Disable right-click context menu.
NoBrowserOptions : Disable the Tools / Internet Options menu.
NoBrowserSaveAs : Disable the ability to Save As.
NoFavorites : Disable the Favorites.
NoFileNew : Disable the File / New command.
NoFileOpen : Disable the File / Open command.
NoFindFiles : Disable the Find Files command.
NoSelectDownloadDir : Disable the option of selecting a download directory.
NoTheaterMode : Disable the Full Screen view option.
Hacking Secrets
Almost all system administrators make certain changes and make the system restricted. System Administrators can hide the RUN option, the FIND command, the entire Control Panel, drives in My Computer like D: A: etc. They can even restrict activities of a hacker my disabling or hiding, even the tiniest options or tools.
Most commonly these restrictions are imposed locally and are controlled by the Windows Registry. But sometimes the smart system administrators control the activities of the hacker by imposing restrictions remotely through the main server.
Poledit or Policy Editor is a small kewl tool which is being commonly used by system administrators to alter the settings of a system. This utility is not installed by default by Windows. You need to install in manually from the Windows 98 Installation Kit from the Resource Kit folder. user.dat file that we saw earlier.
The Policy Editor tool imposes restrictions on the user's system by editing the user.dat file which in turn means that it edits the Windows Registry to change the settings. It can be used to control or restrict access to each and every folder and option you could ever think of. It has the power to even restrict access to individual folders, files, the Control Panel, MS DOS, the drives available etc. Sometimes this software does make life really hard for a Hacker. So how can we remove the restrictions imposed by the Policy Editor? Well read ahead to learn more.
You see the Policy Editor is not the only way to restrict a user's activities. As we already know that the Policy Editor edits the Windows Registry(user.dat) file to impose such restrictions. So this in turn would mean that we can directly make changes to the Windows Registry using a .reg file or directly to remove or add restrictions.
Launch Regedit and go to the following Registry Key:
HKEY_CURRENT_USER/Software/Microsoft/CurrentVersion/Policies
Under this key, there will definitely be a key named explorer. Now under this explorer key we can create new DWORD values and modify it's value to 1 in order to impose the restriction. If you want to remove the Restriction, then you can simply delete the respective DWORD values or instead change their values to 0. The following is a list of DWORD values that can be created under the Explorer Key-:
NoDeletePrinter: Disables Deletion of already installed Printers
NoAddPrinter: Disables Addition of new Printers
NoRun : Disables or hides the Run Command
NoSetFolders: Removes Folders from the Settings option on Start Menu (Control Panel, Printers, Taskbar)
NoSetTaskbar: Removes Taskbar system folder from the Settings option on Start Menu
NoFind: Removes the Find Tool (Start >Find)
NoDrives: Hides and does not display any Drives in My Computer
NoNetHood: Hides or removes the Network Neighborhood icon from the desktop
NoDesktop: Hides all items including, file, folders and system folders from the Desktop
NoClose: Disables Shutdown and prevents the user from normally shutting down Windows.
NoSaveSettings: Means to say, 'Don't save settings on exit'
DisableRegistryTools: Disable Registry Editing Tools (If you disable this option, the Windows Registry Editor(regedit.exe) too
will not work.)
NoRecentDocsHistory: Removes Recent Document system folder from the Start Menu (IE 4 and above)
ClearRecentDocsOnExit: Clears the Recent Documents system folder on Exit.
Nolnternetlcon: Removes the Internet (system folder) icon from the Desktop
Under the same key: HKEY_CURRENT_USER/Software/Microsoft/CurrentVersion/Policies you can create new subkeys other than the already existing Explorer key. Now create a new key and name it System. Under this new key, system we can create the following new DWORD values(1 for enabling the particular option and 0 for disabling the particular option):
NODispCPL: Hides Control Panel
NoDispBackgroundPage: Hides Background page.
NoDispScrsavPage: Hides Screen Saver Page
NoDispAppearancePage: Hides Appearance Page
NoDispSettingsPage: Hides Settings Page
NoSecCPL: Disables Password Control Panel
NoPwdPage: Hides Password Change Page
NoAdminPaqe: Hides Remote Administration Page
NoProfilePage: Hides User Profiles Page
NoDevMgrPage: Hides Device Manager Page
NoConfigPage: Hides Hardware Profiles Page
NoFileSysPage: Hides File System Button
NoVirtMemPage: Hides Virtual Memory Button
Similarly, if we create a new subkey named Network, we can add the following DWORD values under it(1 for enabling the particular option and 0 for disabling the particular option):
NoNetSetupSecurityPage: Hides Network Security Page
NoNelSetup: Hides or disables the Network option in the Control Panel
NoNetSetupIDPage: Hides the Identification Page
NoNetSetupSecurityPage: Hides the Access Control Page
NoFileSharingControl: Disables File Sharing Controls
NoPrintSharing: Disables Print Sharing Controls
Similarly, if we create a new subkey named WinOldApp, we can add the following DWORD values under it(1 for enabling the particular option and 0 for disabling the particular option):
Disabled: Disable MS-DOS Prompt
NoRealMode: Disable Single-Mode MS-DOS.
So you see if you have access to the Windows Registry, then you can easily create new DWORD values and set heir value to 1 for enabling the particular option and 0 for disabling the particular option. But Sometimes, access to the Windows Registry is blocked. So what do you do? Go to the Windows Directory and delete either user.dat or system.dat (These 2 files constitute the Windows Registry.) and reboot. As soon as Windows logs in, it will display a Warning Message informing you about an error in the Windows Registry. Simply ignore this Warning Message and Press CTRL+DEL+ALT to get out of this warning message.(Do not press OK) You will find that all restrictions have been removed.
The most kind of restriction found quite commonly is the Specific Folder Restriction, in which users are not allowed access to specific folders, the most common being the Windows folder, or sometimes even access to My Computer is blocked. In effect, you simply cannot seem to access the important kewl files which are needed by you to do remove restrictions. What do you? Well use the RUN command. (START >RUN). But unfortunately a system administrator who is intelligent enough to block access to specific folder, would definitely have blocked access to the RUN command. Again we are stuck.
Windows is supposed to be the most User Friendly Operating System on earth. (At least Microsoft Says so.)
It gives the User an option to do the same thing in various ways. You see the RUN command is only the most convenient option of launching applications, but not the only way. In Windows you can create shortcuts to almost anything from a file, folder to a Web URL. So say your system administrator has blocked access to the c:windowssystem folder and you need to access it. What do you do? Simply create a Shortcut to it. To do this right click anywhere on the desktop and select New > Shortcut. A new window titled Create Shortcut pops up. Type in the path of the restricted folder you wish to access, in this case c:windowssystem. Click Next, Enter the friendly name of the Shortcut and then click Finish. Now you can access the restricted folder by simply double clicking on the shortcut icon. Well that shows how protected and secure *ahem Windows *ahem is.
****************
HACKING TRUTH: Sometimes when you try to delete a file or a folder, Windows displays an error message saying that the file is protected. This simply means that the file is write protected, or in other words the R option is +. Get it? Anyway, you can stop Windows from displaying this error message and straightaway delete this file by changing its attributes to Non Read Only. This can be done by Right Clicking on the file, selecting Properties and then
unselecting the Read Only Option.
***************
There is yet another way of accessing restricted folders. Use see, DOS has a lovely command known as START. Its general syntax is:
START application_path
It does do what it seems to do, start applications. So in you have access to DOS then you can type in the START command to get access to the restricted folder. Now mostly access to DOS too would be blocked. So again you can use the shortcut trick to launch, c:command.com or c:windowscommand.com. (Command.com is the file which launches MS DOS).
Accessing Restricted Drives.
The problem with most system administrators is that they think that the users or Hackers too are stupid. Almost all system administrators use the Registry Trick (Explained Earlier) to hide all drives in My Computer. So in order to unhide or display all drives, simply delete that particular key.(Refer to beginning of Untold Secrets Section.)
Some systems have the floppy disk disabled through the BIOS. On those systems if the BIOS is protected, you may need to crack the BIOS password. (For that Refer to the Windows Hacking Chapter). Sometimes making drives readable (Removing R +) and then creating Shortcuts to them also helps us to get access to them.
Further Changing your Operating System's Looks by editing .htt files
If you have installed Windows Desktop Update and have the view as Web Page option enabled, you can customise the way the folder looks by selecting View > Customise this folder. Here you can change the background and other things about that particular folder. Well that is pretty lame, right? We hackers already know things as lame as that. Read on for some kewl stuff.
Well, you could also change the default that is stored in a Hidden HTML Template file (I think so..) which is nothing but a HTML document with a .htt extension. This .htt file is found at: %systemroot%webfolder.htt.
The %systemroot% stands for the drive in which Windows is Installed, which is normally C:
You can edit these .htt files almost just like you edit normal .HTM or .HTML files. Simply open them in an ASCII editor like Notepad. The following is a list of .htt files on your system which control various folders and which can be edited to customise the way various folders look.
controlp.htt Control Panel
printers.htt Printers
mycomp.htt My Computer
safemode.htt Safe Mode
All these files are found in the web folder in %systemfolder%. The folder.htt file has a line:
'Here's a good place to add a few lines of your own"
which is the place where you can add your own A HREF links. These links would then appear in the folder whose folder.htt file you edited. All this might sound really easy and simple, but you see these .htt files do not contain normal HTML code, instead they contain a mixture of HTML and web bots. Hence they can be difficult for newbies to understand.
Wow long txt, and yes it has been copied from other sites, you think I have time to write all this myself, I wish enjoy
User is offlineProfile CardPM
Report PostGo to the top of the page
+Quote Post
Subscribe to:
Posts (Atom)
